Registered transceiver
INTEGRATED CIRCUITS
74F2952 Registered transceiver, non-inverting (3-State) 74F2953 Registered transceiver, inverting (...
Description
INTEGRATED CIRCUITS
74F2952 Registered transceiver, non-inverting (3-State) 74F2953 Registered transceiver, inverting (3-State)
Product specification IC15 Data Handbook 1989 Sep 22
Philips Semiconductors
Philips Semiconductors
Product specification
Transceivers
74F2952 74F2953
FEATURES
74F2952, 74F2953
Registered transceiver, non-inverting (3-State) Registered transceiver, inverting (3-State)
DESCRIPTION
The 74F2952 and 74F2953 are 8-bit registered transceivers. Two 8-bit back-to-back registers store data flowing in both directions between two bi-directional buses. Data applied to the inputs is entered and stored on the rising edge of the Clock (CPXX) provided that the Clock Enable (CEXX) is Low. The data is then present at the 3-State output buffers, but is only accessible when the Output Enable (OEXX) is Low. Data flow from ‘A’ inputs to ‘B’ outputs is the same as for ‘B’ inputs to ‘A’ outputs. TYPICAL SUPPLY CURRENT (TOTAL) 105mA 105mA
8-bit registered transceivers Two 8-bit, back-to-back registers store data moving in both
directions between two bidirectional buses
Separate Clock, Clock Enable and 3-State Enable provided for
each register
74F2952 non-inverting 74F2953 inverting AM2952/2953 functional equivalent ‘A’ outputs sink 24mA and source 3mA ‘B’ outputs sink 64mA and source 15mA 300 mil wide 24-pin Slim DIP package
ORDERING INFORMATION
DESCRIPTION 24-pin Plastic Slim DIP (300mil) 24-pin Plastic SOL1
TYPE 74F2952 74F2953
TYPICAL fMAX 160...
Similar Datasheet