Quad 2-Input Multiplexer
74F258A Quad 2-Input Multiplexer with 3-STATE Outputs
April 1988 Revised September 2000
74F258A Quad 2-Input Multiplex...
Description
74F258A Quad 2-Input Multiplexer with 3-STATE Outputs
April 1988 Revised September 2000
74F258A Quad 2-Input Multiplexer with 3-STATE Outputs
General Description
The 74F258A is a quad 2-input multiplexer with 3-STATE outputs. Four bits of data from two sources can be selected using a common data select input. The four outputs present the selected data in the complement (inverted) form. The outputs may be switched to a high impedance state with a HIGH on the common Output Enable (OE) input, allowing the outputs to interface directly with bus-oriented systems.
Features
s Multiplexer expansion by tying outputs together s Inverting 3-STATE outputs
Ordering Code:
Order Number Package Number
Package Description
74F258ASC
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow
74F258ASJ
M16D
16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
74F258APC
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Logic Symbols
Connection Diagram
IEEE/IEC
© 2000 Fairchild Semiconductor Corporation DS009508
www.fairchildsemi.com
74F258A
Unit Loading/Fan Out
Pin Names
Description
S OE I0a–I0d I1a–I1d Za–Zd
Common Data Select Input 3-STATE Output Enable Input (Active LOW) Data Inputs from Source 0 Data Inputs from Source 1 3-STATE Inverting Data Outputs
U.L. HIGH/LOW
1.0/1.0 1.0/1.0 1.0/1.0 1.0/1.0 150/40 (...
Similar Datasheet