Octal transceiver
INTEGRATED CIRCUITS
74F245 Octal transceiver (3-State)
Product specification IC15 Data Handbook 1994 Nov 15
Philips Se...
Description
INTEGRATED CIRCUITS
74F245 Octal transceiver (3-State)
Product specification IC15 Data Handbook 1994 Nov 15
Philips Semiconductors
Philips Semiconductors
Product specification
Octal transceiver (3-State)
74F245
FEATURES
Octal bidirectional bus interface 3-State buffer outputs sink 64mA 15mA source current Outputs are placed in high impedance state during power-off
conditions
PIN CONFIGURATION
T/R 1 A0 A1 A2 A3 A4 2 3 4 5 6 7 8 9 20 VCC 19 OE 18 B0 17 B1 16 B2 15 B3 14 B4 13 B5 12 B6 11 B7
DESCRIPTION
The 74F245 is an octal transceiver featuring non-inverting 3-State bus compatible outputs in both transmit and receive directions. The B port outputs are capable of sinking 64mA and sourcing 15mA, producing very good capacitive drive characteristics. The device features an Output Enable (OE) input for easy cascading and Transmit/Receive (T/R) input for direction control. The 3-State outputs, B0–B7, have been designed to prevent output bus loading if the power is removed from the device. TYPE 74F245 TYPICAL PROPAGATION DELAY 4.0ns
A5 A6 A7
GND 10
SF00198
TYPICAL SUPPLY CURRENT (TOTAL) 70mA
ORDERING INFORMATION
DESCRIPTION 20-Pin Plastic DIP 20-Pin Plastic SO 20-Pin Plastic SSOP Type II COMMERCIAL RANGE VCC = 5V ±10%, Tamb = 0°C to +70°C N74F245N N74F245D N74F245DB DRAWING NUMBER SOT146-1 SOT163-1 SOT339-1
INPUT AND OUTPUT LOADING AND FAN-OUT TABLE
PINS A0–A7, B0–B7 OE T/R A0–A7 B0–B7 Data inputs Output Enable input (active Low) Transmit/Receive input A port...
Similar Datasheet