2 GHz Band Power Dividers/Combiners
2 GHz Band Power Dividers/Combiners
C/D Series
sFeatures
1.Division System
The micro stripline method, which uses the pr...
Description
2 GHz Band Power Dividers/Combiners
C/D Series
sFeatures
1.Division System
The micro stripline method, which uses the principle of the /4 impedance converter, provides excellent high frequency performance.
2.High Performance
The low insertion loss and high isolation (of over 20 dB) afforded by the Wilkinson circuit structure make these power dividers ideal for use in portable telephone base stations, measuring instruments, and for measurements.
3.Highly Reliable Design
Connectors are of the SMA type and use stainless steel for extremely high performance. The case uses corrosion-resistant aluminum and is both miniature and lightweight.
sProduct Specifications
Ratings Frequency range Characteristic impedance Maximum Input Power 1.7 to 2.3 GHz 50 ohms 1 to 25 W Operating temperature range Operating relative humidity -10ç to +65ç 95% Max.
qPlease see the specification items for details concerning insertion loss, VSWR, and isolation.
Item 1.Vibration 2.Shock Standard Conditions Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 axis Acceleration of 294 m/s2, sine half-wave waveform, No damage, cracks, or parts dislocation 3 cycles in each of the 3 axis Temperature: -40ç ¡ +15ç to +35ç ¡ +85ç ¡ +15ç to +35ç 3.Temperature cycle Time: 30 ¡ 2 to 3 max. ¡ 30 ¡ 2 to 3 max. (Minutes) 100 cycles
qThe test method conforms to MIL-STD-202.
sMaterials
Part
Connector Body Connector female contacts Connector Insulator
sOrdering Information
Material Stainless st...
Similar Datasheet