DatasheetsPDF.com

SF1G1 Dataheets PDF



Part Number SF1G1
Manufacturers GOOD-ARK Electronics
Logo GOOD-ARK Electronics
Description GLASS PASSIVATED SUPER FAST RECTIFIER
Datasheet SF1G1 DatasheetSF1G1 Datasheet (PDF)

SF1G1 THRU SF1G7 GLASS PASSIVATED SUPER FAST RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere Features Superfast recovery times Low forward voltage, high current capability Hermetically sealed Low leakage High surge capability Plastic package has Underwriters Laboratories Flammability Classification 94V-0 utilizing Flame retardant epoxy molding compound Mechanical Data Case: Molded plastic, R-1 Terminals: Axial leads, solderable to MIL-STD-202, method 208 Polarity: Col.

  SF1G1   SF1G1


Document
SF1G1 THRU SF1G7 GLASS PASSIVATED SUPER FAST RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere Features Superfast recovery times Low forward voltage, high current capability Hermetically sealed Low leakage High surge capability Plastic package has Underwriters Laboratories Flammability Classification 94V-0 utilizing Flame retardant epoxy molding compound Mechanical Data Case: Molded plastic, R-1 Terminals: Axial leads, solderable to MIL-STD-202, method 208 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.007 ounce, 0.205 gram DIM ENSIONS DIM A B C D inches Min. 0.114 0.095 0.020 1.000 Max. 0.138 0.099 0.024 Min. 2.9 2.42 0.5 25.40 mm Max. 3.5 2.51 0.6 Note Maximum Ratings and Electrical Characteristics Ratings at 25 ambient temperature unless otherwise specified. Resistive or inductive load, 60Hz. Symbols SF 1G1 SF 1G2 SF 1G3 SF 1G4 SF 1G5 SF 1G6 SF 1G7 Units Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward current 0.375" (9.5mm) lead length at TA=55 Peak forward surge current, IFM (surge): 8.3mS single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) Maximum forward voltage at 1.0 ADC Maximum DC reverse current at rated DC blocking voltage Maximum DC reverse current at rated DC blocking voltage TA=125 Maximum reverse recovery time (Note 1) Typical junction capacitance (Note 2) Operating and storage temperature range Notes: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0MHz and applied reverse voltage of 4.0 VDC VRRM VRMS VDC I(AV) IFSM VF IR IR Trr CJ TJ, TSTG 50 35 50 100 70 100 200 140 200 400 280 400 1.0 30.0 600 420 600 800 560 800 1000 700 1000 Volts Volts Volts Amp Amps 0.95 1.27 5.0 400.0 35.0 63.0 -55 to +150 1.75 Volts A A nS F 1 RATINGS AND CHARACTERISTIC CURVES 2 .


SF1G SF1G1 SF1G2


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)