Low Noise/ High Frequency/ 8th Order Butterworth Lowpass Filter
U U
LTC1064-2
Low Noise, High Frequency, 8th Order Butterworth Lowpass Filter
FEATURES
■ 8th Order Filter in a 14-Pin ...
Description
U U
LTC1064-2
Low Noise, High Frequency, 8th Order Butterworth Lowpass Filter
FEATURES
■ 8th Order Filter in a 14-Pin Package ■ 140kHz Maximum Corner Frequency ■ No External Components ■ 50:1 and 100:1 Clock to Cutoff Frequency Ratio ■ 80µVRMS Total Wideband Noise ■ 0.03% THD or Better ■ Operates from ±2.37V to ±8V Power Supplies
U APPLICATIO S
■ Antialiasing Filters ■ Smoothing Filters ■ Tracking High Frequency Lowpass Filters
DESCRIPTIO
The LTC®1064-2 is a monolithic 8th order lowpass Butterworth filter, which provides a maximally flat passband. The attenuation slope is –48dB/octave and the maximum attenuation is in excess of 80db. An external TTL or CMOS clock programs the filter’s cutoff frequency. The clock to cutoff frequency ratio is 100:1 (Pin 10 at V–) or 50:1 (Pin 10 at V+). The maximum cutoff frequency is 140kHz. No external components are needed.
The LTC1064-2 features low wideband noise and low harmonic distortion even for input voltages up to 3VRMS. In fact the LTC1064-2 overall performance competes with equivalent multiple op amp RC active realizations. The LTC1064-2 is available in a 14-pin DIP or 16-pin surface mounted SW package. The LTC1064-2 is fabricated using LTC’s enhanced analog CMOS Si-gate process.
The LTC1064-2 is pin compatible with the LTC1064-1.
, LTC and LT are registered trademarks of Linear Technology Corporation.
TYPICAL APPLICATIO
8th Order Clock Sweepable Lowpass Butterworth Filter
1 NC
14 OUT C
2 LTC1064-2 13 VIN NC
3 AGND
V–
12...
Similar Datasheet