Quad / Low-Power / Current-Feedback OPERATIONAL AMPLIFIER
www.DataSheet4U.com
OPA
691
OPA6 91
OPA691
SBOS226A – DECEMBER 2001– REVISED SEPTEMBER 2002
Wideband, Current Feedb...
Description
www.DataSheet4U.com
OPA
691
OPA6 91
OPA691
SBOS226A – DECEMBER 2001– REVISED SEPTEMBER 2002
Wideband, Current Feedback OPERATIONAL AMPLIFIER With Disable
FEATURES
q FLEXIBLE SUPPLY RANGE: +5V to +12V Single-Supply ±2.5V to ±6V Dual-Supply q UNITY-GAIN STABLE: 280MHz (G = 1) q HIGH OUTPUT CURRENT: 190mA q OUTPUT VOLTAGE SWING: ±4.0V q HIGH SLEW RATE: 2100V/µs q LOW dG/dφ: 0.07% /0.02° q LOW SUPPLY CURRENT: 5.1mA q LOW DISABLED CURRENT: 150µA q WIDEBAND +5V OPERATION: 190MHz (G = +2)
APPLICATIONS
q q q q q q q q xDSL LINE DRIVER BROADBAND VIDEO BUFFERS HIGH-SPEED IMAGING CHANNELS PORTABLE INSTRUMENTS ADC BUFFERS ACTIVE FILTERS WIDEBAND INVERTING SUMMING HIGH SFDR IF AMPLIFIER
DESCRIPTION
The OPA691 sets a new level of performance for broadband current feedback op amps. Operating on a very low 5.1mA supply current, the OPA691 offers a slew rate and output power normally associated with a much higher supply current. A new output stage architecture delivers a high output current with minimal voltage headroom and crossover distortion. This gives exceptional single-supply operation. Using a single +5V supply, the OPA691 can deliver a 1V to 4V output swing with over 150mA drive current and 190MHz bandwidth. This combination of features makes the OPA691 an ideal RGB line driver or single-supply Analog-to-Digital Converter (ADC) input driver. The OPA691’s low 5.1mA supply current is precisely trimmed at 25°C. This trim, along with low drift over-temperature,
ensures lower maxim...
Similar Datasheet