Document
INTEGRATED CIRCUITS
OM5234/OM5284 CMOS single-chip 8-bit microcontrollers
Preliminary specification 1996 Nov 01
Philips Semiconductors
Philips Semiconductors
Preliminary specification
CMOS single-chip 8-bit microcontrollers
OM5234/OM5284
DESCRIPTION
The OM5234 and OM5284 single-chip 8-bit microcontrollers are manufactured in an advanced CMOS process and are derivatives of the 80C51 microcontroller family. The OM5234 and OM5284 are pre-programmed devices for specific applications. Unless specifically stated otherwise, all references to OM5234 apply equally to OM5284. The OM5234 contains a non-volatile 16k × 8 read-only program memory, a volatile 256 × 8 read/write data memory, four 8-bit I/O ports, two 16-bit timer/event counters (identical to the timers of the 80C51), a multi-source, two-priority-level, nested interrupt structure, UART and on-chip oscillator and timing circuits.
FEATURES
• 80C51 central processing unit • 6k × 8 ROM • 256 × 8 RAM • Two standard 16-bit timer/counters • Four 8-bit I/O ports • Full-duplex UART facilities • Power control modes
– Idle mode – Power-down mode
• ROM code protection
ORDERING INFORMATION
OM5234 / F T P / YYY Device OM5234 Frequency Range F = 3.5 to 16MHz I = 3.5 to 24MHz Temperature Range B = 0 to 70°C PART NUMBER OM5234/FBB/YYY OM5234/FBP/YYY OM5234/FBA/YYY OM5284EBYY OM5284EAYY OM5284EPYY ROM code for application 5XX, etc. Package designator A = Plastic Leaded Chip Carrier B = Plastic Quad Flat Package P = Plastic Dual In-Line Package Device OM5284 Frequency Range E = 3.5 to 16MHz I = 3.5 to 24MHz OM5284 X Y ZZ ROM code for application 01, 02, 03 Package designator A = Plastic Leaded Chip Carier B = Plastic Quad Flat Package P = Plastic Dual In-Line Package FREQUENCY (MHz) 16 16 16 16 16 16 DRAWING NUMBER SOT307-2 SOT129-1 SOT187-2 SOT307-2 SOT187-2 SOT129-1
TEMPERATURE RANGE °C AND PACKAGE 0 to 70°C, Plastic Quad Flat Package 0 to 70°C, Plastic Dual In-Line Package 0 to 70°C, Plastic Leaded Chip Carrier 0 to 70°C, Plastic Quad Flat Package 0 to 70°C, Plastic Leaded Chip Carrier 0 to 70°C, Plastic Dual In-Line Package
LOGIC SYMBOL
VCC VSS RST PORT 0 XTAL1 XTAL2 EA PSEN ALE
ADDRESS AND DATA BUS
ALTERNATE FUNCTIONS
RxD TxD INT0 INT1 T0 T1 WR RD
PORT 3
PORT 2
PORT 1
ADDRESS BUS
SU00800
1996 Nov 01
2
Philips Semiconductors
Preliminary specification
CMOS single-chip 8-bit microcontrollers
OM5234/OM5284
PIN CONFIGURATIONS DUAL IN-LINE PACKAGE PIN FUNCTIONS
P1.0 P1.1 P1.2 P1.3 P1.4 P1.5 P1.6 P1.7 RST 1 2 3 4 5 6 7 8 9 DUAL IN-LINE PACKAGE 40 VDD 39 P0.0/AD0 38 P0.1/AD1 37 P0.2/AD2 36 P0.3/AD3 17 35 P0.4/AD4 34 P0.5/AD5 33 P0.6/AD6 32 P0.7/AD7 31 EA 30 ALE 29 PSEN 28 P2.7/A15 27 P2.6/A14 26 P2.5/A13 25 P2.4/A12 24 P2.3/A11 23 P2.2/A10 22 P2.1/A9 21 P2.0/A8 Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Function NC* P1.0 P1.1 P1.2 P1.3 P1.4 P1.5 P1.6 P1.7 RST P3.0/RxD NC* P3.1/TxD P3.2/INT0 P3.3/INT1 18 Pin 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Function P3.4/T0 P3.5/T1 P3.6/WR P3.7/RD XTAL2 XTAL1 VSS NC* P2.0/A8 P2.1/A9 P2.2/A10 P2.3/A11 P2.4/A12 P2.5/A13 P2.6/A14 28 Pin 31 32 33 34 35 36 37 38 39 40 41 42 43 44 Function P2.7/A15 PSEN ALE NC* EA P0.7/AD7 P0.6/AD6 P0.5/AD5 P0.4/AD4 P0.3/AD3 P0.2/AD2 P0.1/AD1 P0.0/AD0 VDD 29 PLCC 7 39
PLASTIC LEADED CHIP CARRIER PIN FUNCTIONS
6 1 40
P3.0/RxD 10 P3.1/TxD 11 P3.2/INT0 12 P3.3/INT1 13 P3.4/T0 14 P3.5/T1 15 P3.6/WR 16 P3.7/RD 17 XTAL2 18 XTAL1 19 VSS 20
* DO NOT CONNECT
SU00798
SU00802
PLASTIC QUAD FLAT PACK PIN FUNCTIONS
44 34
1
33
PQFP
11
23
12 Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Function P1.5 P1.6 P1.7 RST P3.0/RxD VSS4 P3.1/TxD P3.2/INT0 P3.3/INT1 P3.4/T0 P3.5/T1 P3.6/WR P3.7/RD XTAL2 XTAL1 Pin 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Function VSS1 NC* P2.0/A8 P2.1/A9 P2.2/A10 P2.3/A11 P2.4/A12 P2.5/A13 P2.6/A14 P2.7/A15 PSEN ALE VSS2 EA/VPP P0.7/AD7
22 Pin 31 32 33 34 35 36 37 38 39 40 41 42 43 44 Function P0.6/AD6 P0.5/AD5 P0.4/AD4 P0.3/AD3 P0.2/AD2 P0.1/AD1 P0.0/AD0 VDD VSS3 P1.0 P1.1 P1.2 P.13 P1.4
SU00799
1996 Nov 01
3
Philips Semiconductors
Preliminary specification
CMOS single-chip 8-bit microcontrollers
OM5234/OM5284
PIN DESCRIPTIONS
PIN NUMBER MNEMONIC PLCC VSS VDD P0.0–0.7 22 44 43–36 QFP 6, 16, 28, 39 38 37–30 DIP 20 40 39–32 TYPE I I I/O NAME AND FUNCTION Ground: 0V reference. With the QFP package, all VSS pins (VSS1 to VSS4) must be connected. Power Supply: This is the power supply voltage for normal, idle, and power-down operation. Port 0: Port 0 is an open-drain, bidirectional I/O port. Port 0 pins that have 1s written to them float and can be used as high-impedance inputs. Port 0 is also the multiplexed low-order address and data bus during accesses to external program and data memory. In this application, it uses strong internal pull-ups when emitting 1s. Port 1: Port 1 is an 8-bit bidirectional I/O port with internal pull-ups, except P1.6 and P1.7, which are open drain for OM5234 (only). Port 1 pins that have 1s written to them are pulled high by the int.