OM3105P

DISCRETE SEMICONDUCTORS DATA SHEET OM3105P Hybrid integrated circuits for inductive proximity detectors Preliminary specification File under Discrete Semiconductors, SC17 January 1994 Philips Semiconductors Philips Semiconductors Preliminary specification Hybrid integrated circuits for inductive proximity detectors FEATURES Extra small dimensions (3 x 20 mm max.) Wide supply voltage range (6 to 35 V) Supply current typical 1.5 mA (output stage switched off) High output current (250 mA max.) RC filter on the supply lines PNP output transistor protected against transients from the inductive load Circuit protected against wrong polarity connection of the supply voltage Electronic short-circuit protection Detection distance adjustable by a chip resistor (Rd), type 1206 Only a simple coil in one part is required; e.g. the OM2860 requires a coil in two parts Hysteresis adjustable by a chip resistor (Rh), type 0603, for using the OM3105P with other then M5 coils Status of the output is shown by a yellow or red LED mounted on the substrate surface The OM3105P is also available without a LED, but with an output pad for external LED connection A version with a NPN output transistor is available (OM3105P). QUICK REFERENCE DATA SYMBOL VB IO fsw Ts PARAMETER DC supply voltage output current operating switching frequency operating substrate temperature VB = 24 V; Ts = 25 °C M5 coil CONDITIONS 6 − − −20 TYP. DESCRIPTION OM3105P The OM3105P is a hybrid integ...