Transimpedance amplifier 280MHz
Philips Semiconductors
Product specification
Transimpedance amplifier (280MHz)
NE5210
DESCRIPTION
The NE5210 is a 7k...
Description
Philips Semiconductors
Product specification
Transimpedance amplifier (280MHz)
NE5210
DESCRIPTION
The NE5210 is a 7kΩ transimpedance wide band, low noise amplifier with differential outputs, particularly suitable for signal recovery in fiber-optic receivers. The part is ideally suited for many other RF applications as a general purpose gain block.
PIN CONFIGURATION
D Package
GND2 GND2 1 2 3 4 5 6 7 14 13 12 11 10 9 8 OUT (–) GND2 OUT (+) GND1 GND1 GND1 GND1
FEATURES
NC IIN NC VCC1 VCC2
Low noise: 3.5pA/√Hz Single 5V supply Large bandwidth: 280MHz Differential outputs Low input/output impedances High power supply rejection ratio High overload threshold current Wide dynamic range 7kΩ differential transresistance
APPLICATIONS
TOP VIEW
SD00318
Fiber-optic receivers, analog and digital Current-to-voltage converters
ORDERING INFORMATION
DESCRIPTION 14-Pin Plastic Small Outline (SO) Package
Wideband gain block Medical and scientific instrumentation Sensor preamplifiers Single-ended to differential conversion Low noise RF amplifiers RF signal processing
TEMPERATURE RANGE 0 to +70°C
ORDER CODE NE5210D
DWG # SOT108-1
ABSOLUTE MAXIMUM RATINGS
SYMBOL VCC TA TJ TSTG PDMAX IINMAX Power supply Operating ambient temperature range Operating junction temperature range Storage temperature range Power dissipation, TA=25°C (still air)1 Maximum input current2 PARAMETER RATING 6 0 to +70 -55 to +150 -65 to +150 1.0 5 UNIT V °C °C °C W mA
NOTES: 1. ...
Similar Datasheet