TinyLogic UHS 1-of-2 Non-Inverting Demultiplexer
NC7SZ18 TinyLogic UHS 1-of-2 Non-Inverting Demultiplexer with 3-STATE Deselected Output
September 1999 Revised May 200...
Description
NC7SZ18 TinyLogic UHS 1-of-2 Non-Inverting Demultiplexer with 3-STATE Deselected Output
September 1999 Revised May 2003
NC7SZ18 TinyLogic UHS 1-of-2 Non-Inverting Demultiplexer with 3-STATE Deselected Output
General Description
The NC7SZ18 is a 1-of-2 non-inverting demultiplexer. The device will buffer the data on the A pin and pass to either output Y0 or Y1 dependent on whether state of the select pin (S) is LOW or HIGH respectively. The deselected output will be placed into a high impedance state. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC operating range. The inputs and outputs are high impedance when VCC is 0V. Inputs tolerate voltages up to 5.5V independent of VCC operating range.
Features
s Space saving SC70 6-lead surface mount package s Ultra small MicroPak leadless package s High Impedance output when deselected s Ultra High Speed: tPD 2.5 ns Typ into 50 pF at 5V VCC s Broad VCC Operating Range; 1.65V to 5.5V s Power down high impedance inputs/outputs s Overvoltage tolerant inputs facilitate 5V to 3V translation s Patented noise/EMI reduction circuitry implemented
Ordering Code:
Order Number NC7SZ18P6X NC7SZ18L6X Package Number MAA06A MAC06A Product Code Top Mark Z18 D5 Package Description 6-Lead SC70, EIAJ SC88, 1.25mm Wide 6-Lead MicroPak, 1.0mm Wide Suppl...
Similar Datasheet