Dual-In-Line Package Intelligent Power-Module
MITSUBISHI MITSUBISHI SEMICONDUCTOR SEMICONDUCTOR
Description
MITSUBISHI MITSUBISHI SEMICONDUCTOR SEMICONDUCTOR Module>
PS21205 PS21205
TRANSFER-MOLD TRANSFER-MOLD TYPE TYPE INSULATED INSULATED TYPE TYPE
PS21205
INTEGRATED POWER FUNCTIONS
600V/20A low-loss 3rd generation IGBT inverter bridge for 3 phase DC-to-AC power conversion (Fig. 2) Application Motor Ratings : Power : 1.5kW, sinusoidal, PWM Frequency=5kHz 100% load current : 8.0A (rms)* 150% load current : 12.0A (rms)*, 1 minute. *(Note) : The motor current is assumed to be sinusoidal and the peak current value is defined as : lO ! √ 2
INTEGRATED DRIVE, PROTECTION AND SYSTEM CONTROL FUNCTIONS
For upper-leg IGBTS : Drive circuit, High voltage isolated high-speed level shifting, Control circuit under-voltage (UV) protection. Note : Bootstrap supply scheme can be applied (Fig. 2). For lower-leg IGBTS : Drive circuit, Control curcuit under-voltage protection (UV), Short circuit protection (SC). (Fig. 3) Fault signaling : Corresponding to a SC fault (Low-side IGBT) or a UV fault (Low-side supply). Input interface : 5V line CMOS/TTL compatible, Schmitt Trigger receiver circuit.
APPLICATION AC100V~200V three-phase inverter drive for small power (1.5 kW) motor control.
Fig. 1 PACKAGE OUTLINES
2.8
1 2
3 4
5 6
7
8
9 10 11 12 13
14 15 16 17 18 19 20 21
11.5
31
2-φ4.5
22 23 24 25 26
10
10
10 67 79
20
13.4
21.4
3.8
TERMINALS CODE 1. UP 4. VUFS 2. VP1 5. VP 3. VUFB 6. VP1
7. VV...
Similar Datasheet