Document
PR3001G - PR3007G
3.0A FAST RECOVERY GLASS PASSIVATED RECTIFIER Features
· · · · · · · Glass Passivated Die Construction Diffused Junction Fast Switching for High Efficiency High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 125A Peak Low Reverse Leakage Current Plastic Material: UL Flammability Classification Rating 94V-0
A
B
A
D
DO-201AD Dim A B C D Min 25.40 7.20 1.20 4.80 Max ¾ 9.50 1.30 5.30
C
Mechanical Data
· · · · · Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Marking: Type Number Weight: 1.12 grams (approx.)
All Dimensions in mm
Maximum Ratings and Electrical Characteristics
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @ TA = 55°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage Reverse Recovery Time (Note 3) Typical Junction Capacitance (Note 2) Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range @ IF = 3.0A @ TA = 25°C @ TA = 125°C
@ TA = 25°C unless otherwise specified
PR PR PR PR PR PR PR Symbol 3001G 3002G 3003G 3004G 3005G 3006G 3007G VRRM VRWM VR VR(RMS) IO IFSM VFM IRM trr Cj RqJA Tj, TSTG 150 50 32 -65 to +150 50 35 100 70 200 140 400 280 3.0 125 1.3 5.0 100 250 500 600 420 800 560 1000 700
Unit V V A A V mA ns pF K/W °C
Notes:
1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Measured with IF = 0.5A, IR = 1A, Irr = 0.25A. See figure 5.
DS27003 Rev. D-2
1 of 2
PR3001G - PR3007G
I(AV), AVERAGE FWD RECTIFIED CURRENT (A)
Single phase half wave Resistive or Inductive load
3
IF, INSTANTANEOUS FOWRARD CURRENT (A)
4
10
1.0
2
0.1
1
0 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Forward Derating Curve 175
Tj = 25°C Pulse width = 300 µs
0.01
0.6 0.8 1.0 1.2 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics
Tj = 25°C f = 1 MHz
200
100
IFSM, PEAK FWD SURGE CURRENT (A)
100
Cj, CAPACITANCE (pF)
10
10 1 10 NUMBER OF CYCLES AT 60 Hz Fig. 3 Peak Forward Surge Current 100
1 1 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance
trr
50Ω NI (Non-inductive) Device Under Test 50V DC Approx 10Ω NI
100
+0.5A
(-)
Pulse Generator (Note 2)
(+) (-)
0A -0.25A
1.0Ω NI
Oscilloscope (Note 1)
(+)
Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω.
-1.0A Set time base for 50/100 ns/cm
Fig. 5 Reverse Recovery Time Characteristic and Test Circuit
DS27003 Rev. D-2
2 of 2
PR3001G - PR3007G
.