DatasheetsPDF.com

NTE3034A Dataheets PDF



Part Number NTE3034A
Manufacturers NTE
Logo NTE
Description Phototransistor Detector
Datasheet NTE3034A DatasheetNTE3034A Datasheet (PDF)

NTE3034A Phototransistor Detector Description: The NTE3034A is designed for industrial processing and control applications such as light modulators, shaft or position encoders, and end tape detectors. The NTE3034A is designed to be used with the NTE3029A infrared emitter in optical slotted coupler/interrupter applications. Features: D Economical, Miniature Plastic Package D Package Designed for Accurate Positioning D Lens Molded into Package Absolute Maximum Ratings: Collector–Emitter Voltage, V.

  NTE3034A   NTE3034A



Document
NTE3034A Phototransistor Detector Description: The NTE3034A is designed for industrial processing and control applications such as light modulators, shaft or position encoders, and end tape detectors. The NTE3034A is designed to be used with the NTE3029A infrared emitter in optical slotted coupler/interrupter applications. Features: D Economical, Miniature Plastic Package D Package Designed for Accurate Positioning D Lens Molded into Package Absolute Maximum Ratings: Collector–Emitter Voltage, VCEO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30V Total Device Dissipation (TA = +25°C), PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150mW Derate Above 25°C (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2mW/°C Operating Junction Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +100°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +100°C Lead Temperature (During Soldering, 1/16” from case, 5sec max., Note 2), TL . . . . . . . . . . +260°C Electrical Characteristics: (TA = +25°C unless otherwise specified) Parameter Collector Dark Current Collector–Emitter Breakdown Voltage Symbol ID Test Conditions VCE = 10V, H [ 0 Min – 30 Typ Max Unit – – 100 – nA V V(BR)CEO IC = 10mA, H [ 0 Optical Characteristics: (TA = +25°C unless otherwise specified) Parameter Collector Light Current Turn–On Time Turn–Off Time Saturation Voltage Wavelength of Maximum Sensitivity Symbol IL ton toff VCE(sat) λs Test Conditions VCE = 5V, H = 500µW/cm2 H = 5mW/cm2, VCC = 5V, RL = 2400Ω H = 5mW/cm2, IC = 2mA, VCC = 5V Min 100 – – – – Typ Max Unit 500 60 0.25 0.25 0.8 – – 0.4 0.4 – µA µs µs V µm Note 1. Measured with device soldered into a typical PC board. Note 2. Heat sink should be applied to leads during soldering to prevent case temperature from exceeding +100°C. .160 (4.06) .045 (1.14) Dia .125 (3.17) .120 (3.04) .168 (4.27) .750 (19.05) Max .020 (.508) E C .100 (2.54) .060 (1.52) .103 (2.62) .


NTE3033 NTE3034A NTE3035


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)