16Kbit/ 8Kbit/ 4Kbit/ 2Kbit/ 1Kbit and 256bit 8-bit or 16-bit wide
M93C86, M93C76, M93C66 M93C56, M93C46, M93C06
16Kbit, 8Kbit, 4Kbit, 2Kbit, 1Kbit and 256bit (8-bit or 16-bit wide) MICRO...
Description
M93C86, M93C76, M93C66 M93C56, M93C46, M93C06
16Kbit, 8Kbit, 4Kbit, 2Kbit, 1Kbit and 256bit (8-bit or 16-bit wide) MICROWIRE Serial Access EEPROM
FEATURES SUMMARY s Industry Standard MICROWIRE Bus
s
Figure 1. Packages
Single Supply Voltage: – 4.5V to 5.5V for M93Cx6 – 2.5V to 5.5V for M93Cx6-W – 1.8V to 5.5V for M93Cx6-R
8 1
PDIP8 (BN)
s s
Dual Organization: by Word (x16) or Byte (x8) Programming Instructions that work on: Byte, Word or Entire Memory Self-timed Programming Cycle with Auto-Erase Ready/Busy Signal During Programming Speed: – 1MHz Clock Rate, 10ms Write Time (Current product, identified by process identification letter F or M) – 2MHz Clock Rate, 5ms Write Time (New Product, identified by process identification letter W)
s s s
8 1
SO8 (MN) 150 mil width
s s s s
Sequential Read Operation Enhanced ESD/Latch-Up Behaviour More than 1 Million Erase/Write Cycles More than 40 Year Data Retention
TSSOP8 (DS) 3x3mm body size
TSSOP8 (DW) 169 mil width
M93C06 IS “NOT FOR NEW DESIGN” The M93C06 is still in production, but is not recommended for new designs. Please refer to AN1571
on how to replace the M93C06 by the M93C46 in your application.
May 2003
1/27
M93C86, M93C76, M93C66, M93C56, M93C46, M93C06
SUMMARY DESCRIPTION These electrically erasable programmable memory (EEPROM) devices are accessed through a Serial Data Input (D) and Serial Data Output (Q) using the MICROWIRE bus protocol. Figure 2. Logic Diagram
Table 2. Memory Size versus Organization
Devic...
Similar Datasheet