Document
Not recommended for new designs – Please use 93AA46C, 93AA56C or 93AA66C.
93AA46/56/66
1K/2K/4K 1.8V Microwire Serial EEPROM
Features:
• Single supply with programming operation down to 1.8V
• Low-power CMOS technology: - 70 A typical active read current at 1.8V - 2 A typical standby current at 1.8V
• ORG pin selectable memory configuration: - 128 x 8- or 64 x 16-bit organization (93AA46) - 256 x 8- or 128 x 16-bit organization (93AA56) - 512 x 8 or 256 x 16-bit organization (93AA66)
• Self-timed erase and write cycles (including auto-erase)
• Automatic ERAL before WRAL • Power on/off data protection circuitry • Industry standard 3-wire serial I/O • Device status signal during erase/write cycles • Sequential read function • 1,000,000 E/W cycles ensured • Data retention > 200 years • 8-pin PDIP/SOIC
(SOIC in JEDEC and EIAJ standards) • Temperature ranges supported:
- Commercial (C):
0°C to +70°C
- Industrial (I):
-40°C to +85°C
Description:
The Microchip Technology Inc. 93AA46/56/66 are 1K, 2K and 4K low voltage serial Electrically Erasable PROMs. The device memory is configured as x8 or x16 bits depending on the ORG pin setup. Advanced CMOS technology makes these devices ideal for low power nonvolatile memory applications. The 93AA Series is available in standard 8-pin PDIP and surface mount SOIC packages. The rotated pin-out 93AA46X/ 56X/66X are offered in the “SN” package only.
Package Types
PDIP
CS 1 CLK 2
DI 3 DO 4
SOIC
CS
1
CLK
2
DI
3
DO
4
SOIC
NU
1
Vcc
2
CS
3
CLK
4
93AA46X 93AA56X 93AA66X
93AA46 93AA56 93AA66
93AA46 93AA56 93AA66
8 VCC 7 NU 6 ORG 5 V SS
8
VCC
7
NU
6
ORG
5
V SS
8
ORG
7
Vss
6
DO
5
DI
Block Diagram
VCC VSS
Memory Array
DI
ORG CS
CLK
Data Register
Mode Decode
Logic
Clock Generator
Address Decoder
Address Counter
Output Buffer
DO
1998-2012 Microchip Technology Inc.
DS20067K-page 1
93AA46/56/66
1.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings(†)
VCC.............................................................................................................................................................................7.0V All inputs and outputs w.r.t. VSS ......................................................................................................... -0.6V to VCC +1.0V Storage temperature ...............................................................................................................................-65°C to +150°C Ambient temperature with power applied ................................................................................................-40°C to +125°C Soldering temperature of leads (10 seconds) .......................................................................................................+300°C ESD protection on all pins ..........................................................................................................................................4 kV
† NOTICE: Stresses above those listed under “Absolute Maximu.