MOSPEC
SR107 Thru SR1100
Schottky Barrier Rectifiers
Using the Schottky Barrier principle with a Molybdenum barrier m...
MOSPEC
SR107 Thru SR1100
Schottky Barrier Rectifiers
Using the
Schottky Barrier principle with a Molybdenum barrier metal. These state-of-the-art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low voltage, high frequency rectification, or as free wheeling and polarity protection diodes.
Features *Low Forward Voltage. *Low Switching noise. *High Current Capacity *Guarantee Reverse Avalanche. *Guard-Ring for Stress Protection. *Low Power Loss & High efficiency. *150℃ Operating Junction Temperature *Low Stored Charge Majority Carrier Conduction. *Plastic Material used Carries Underwriters Laboratory
Flammability Classification 94V-O *Moisture Sensitivity Level: MSL-1
*In compliance with EU RoHs 2002/95/EC directives The marking is indicated by part no. with. “M”. ex:SR107M~SR1100M
MAXIMUM RATINGS
Characteristic
Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage
RMS Reverse Voltage
Average Rectifier Forward Current
Non-Repetitive Peak Surge Current (Surge applied at rate load conditions halfware, single phase, 60Hz)
Operating and Storage Junction Temperature Range
Symbol SR107 SR108 SR109 SR1100 Unit
VRRM VRWM 70 80 90 100 V
VR
VR(RMS)
49
56
63
70
V
IO 1.0 A
IFSM 25 A
TJ , TSTG
-65 to +150
℃
ELECTRIAL CHARACTERISTICS
Characteristic
Symbol SR107 SR108 SR109 SR1100 Unit
Maximum Instantaneous Forward Voltage ( IF =1 Amp )
Maximum Instantaneous Reverse Current ( Rated D...