Micropower Voltage Reference
SPX385-2.5
Micropower Voltage Reference
FEATURES ■ Trimmed Bandgap ............................ 1% and 2% ■ Wide Operati...
Description
SPX385-2.5
Micropower Voltage Reference
FEATURES ■ Trimmed Bandgap ............................ 1% and 2% ■ Wide Operating Current ............... 20µA to 20mA ■ Extended Temperature Range ... -40°C to +85°C ■ Dynamic Impedance .............................. 1Ω max ■ Offered in SOT-23, TO-92, SOIC, and SOT-89 ■ Improved Replacement for LM185/285/385-2.5V, AS385-2.5 ■ Low Cost Solution APPLICATIONS ■ Battery Operating Equipment ■ Adjustable Supplies ■ Switching Power Supplies ■ Error Amplifiers ■ Single Supply Amplifier ■ Monitors / VCR / TV ■ Personal Computers
N/C
SPX385
3 Pin SOT-23
Cathode Anode
Refer to page 4 for pinouts.
DESCRIPTION The SPX385-2.5 is a micropower 2-terminal band-gap voltage reference with a very wide operating current range from 20µA to 20mA that provides a stable voltage. The high stability of this device is primarily the result of the low temperature coefficient Thin Film Resistor process and Laser Trimming of the output voltage at the wafer level. The SPX385-2.5 is available in a SOT-23, TO-92, SOIC-8 and SOT-89 package with an operating temperature range of -40°C to 85°C. A 1.2 and 5 volt device is also available - SPX385-1.2 and SPX385-5. BLOCK DIAGRAM
Cathode (K)
500k + 500k 1.25V
Figure 1: Block Diagram
Date:05/21/04
Anode (A)
SPX385-2.5 Micropower Voltage Reference © Copyright 2004 Sipex Corporation
1
ABSOLUTE MAXIMUM RATINGS
Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This...
Similar Datasheet