MX98715

ADVANCED INFORMATION MX98715AEC-C 1. FEATURES SINGLE CHIP FAST ETHERNET NIC CONTROLLER - CRYSTAL VERSION Supports IEEE802.3x Frame Based Flow Control scheme in full duplex mode. Supports early interrupt on both transmit and receive operations. 100/10 Base-T NWAY auto negotiation function Large on-chip FIFOs for both transmit and receive operations without external local memory Bus master architecture with linked host buffers delivers the most optimized performance 32-bit bus master DMA channel provides ultra low CPU utilization, best fit in server and windows application. Proprietary Adaptive Network Throughput Control (ANTC) technology to optimize data integrity and throughput Support up to 64K bytes boot ROM interface Three levels of loopback diagnositic capability Support a variety of flexible address filtering modes with 16 CAM address and 128 bits hash MicroWire interface to EEPROM for customer's IDs and configuration data Single +5V power supply, CMOS technology, 128-pin PQFP package/LQPF package ( Magic packet technology is a trademark of advanced Micro Device Corp. ) A single chip solution integrates 100/10 Base-T fast Ethernet MAC, PHY and PMD. Microsoft PC97, 98, 99 and Novell 4.11/5.0 certified. Support DMI 2.0 management. Support Intel PXE remote boot device. Fully comply to IEEE 802.3u specification. Operates over 100 meters of STP and category 5 UTP cable. Fully comply to PCI spec. 2.1 with clock frequency up to 33MHz. ...