16-Line to 1-Line Multiplexer
MM74C150 • MM82C19 16-Line to 1-Line Multiplexer 3-STATE • 16-Line to 1-Line Multiplexer
October 1987 Revised January 1...
Description
MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer
October 1987 Revised January 1999
MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer
General Description
The MM74C150 and MM82C19 multiplex 16 digital lines to 1 output. A 4-bit address code determines the particular 1of-16 inputs which is routed to the output. The data is inverted from input to output. A strobe override places the output of MM74C150 in the logical “1” state and the output of MM82C19 in the highimpedance state. All inputs are protected from damage due to static discharge by diode clamps to VCC and GND.
Features
s Wide supply voltage range: s Guaranteed noise margin: s High noise immunity: 3.0V to 15V 1.0V 0.45 VCC (typ.)
s TTL compatibility: Drive 1 TTL Load
Ordering Code:
Order Number MM74C150N MM82C19N Package Number N24A N24A Package Description 24-Lead plastic Dual-In-Line Package (PDIP), JEDEC MS-010, 0.600” Wide 24-Lead plastic Dual-In-Line Package (PDIP), JEDEC MS-010, 0.600” Wide
Connection Diagram
Pin Assignments for DIP
© 1999 Fairchild Semiconductor Corporation
DS005891.prf
www.fairchildsemi.com
MM74C150 MM82C19
Truth Table
MM74C150 Inputs D X 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 C X 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 B X 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 A STROBE E0 X 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 ...
Similar Datasheet