NL27WZ14 Dual Schmitt−Trigger Inverter
The NL27WZ14 is a high performance dual inverter with Schmitt- Trigger inputs ope...
NL27WZ14 Dual Schmitt−Trigger Inverter
The NL27WZ14 is a high performance dual inverter with Schmitt- Trigger inputs operating from a 1.65 to 5.5 V supply. Pin configuration and function are the same as the NL27WZ04, but the inputs have hysteresis and, with its Schmitt trigger function, the NL27WZ14 can be used as a line receiver which will receive slow input signals. The NL27WZ14 is capable of transforming slowly changing input signals into sharply defined, jitter- free output signals. In addition, it has a greater noise margin than conventional inverters. The NL27WZ14 has hysteresis between the positive- going and the negative- going input thresholds (typically 1.0 V) which is determined internally by
transistor ratios and is essentially insensitive to temperature and supply voltage variations.
http://onsemi.com MARKING DIAGRAMS
6 1 SC-88/SOT-363/SC70-6 DF SUFFIX CASE 419B 6
MAd
1
Designed for 1.65 V to 5.5 V VCC Operation Over Voltage Tolerant Inputs and Outputs LVTTL Compatible - Interface Capability with 5 V TTL Logic 24 mA Balanced Output Sink and Source Capability Near Zero Static Supply Current Substantially Reduces System Chip Complexity: FET = 72
Power Requirements Current Drive Capability is 24 mA at the Outputs with VCC = 3 V LVCMOS Compatible
6 6
MAd
1 TSOP-6/SOT-23-6/SC59-6 DT SUFFIX CASE 318G MA = Device Marking d = Date Code 1
PIN ASSIGNMENT
IN A1 1 6 OUT Y1 Pin 1 GND 2 5 VCC 2 3 4 IN A2 3 4 OUT Y2 5 6 Function IN A1 GND IN A2 OUT Y2 VCC ...