MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document by MKP1V120/D
Sidac High Voltage Bilateral Triggers
. . . d...
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document by MKP1V120/D
Sidac High Voltage Bilateral Triggers
. . . designed for direct interface with the ac power line. Upon reaching the breakover voltage in each direction, the device switches from a blocking state to a low voltage on-state. Conduction will continue like an SCR until the main terminal current drops below the holding current. The plastic axial lead package provides high pulse current capability at low cost. Glass passivation insures reliable operation. Applications are: High Pressure Sodium Vapor Lighting Strobes and Flashers Ignitors High Voltage
Regulators Pulse Generators
MKP1V120 MKP1V130
SIDACs 0.9 AMPERES RMS 110 thru 280 VOLTS
MT1
MT2
CASE 59-04 (DO-41) Polarity denoted by cathode band
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating Off-State Repetitive Voltage On-State Current RMS (TL = 80°C, Lead Length = 3/8″, conduction angle = 180°, 60 Hz Sine Wave) On-State Surge Current (Non-repetitive) (60 Hz One Cycle Sine Wave, Peak Value) Operating Junction Temperature Range Storage Temperature Range Lead Solder Temperature (Lead Length ≥ 1/16″ from Case, 10 s Max) Symbol VDRM IT(RMS) ITSM TJ Tstg TL MKP1V120 MKP1V130 ±90 0.9 4 –40 to +125 –40 to +150 230 Unit Volts Amp Amps °C °C °C
THERMAL CHARACTERISTICS
Characteristic Thermal Resistance, Junction to Lead Lead Length = 3/8″ Symbol RθJL Max 40 Unit °C/W
REV 1
Motorola Thyristor Device Data © Motorola, Inc. 1995
1
MKP1V120 M...