DatasheetsPDF.com

80CNT020A Dataheets PDF



Part Number 80CNT020A
Manufacturers International Rectifier
Logo International Rectifier
Description TRENCH SCHOTTKY RECTIFIER
Datasheet 80CNT020A Datasheet80CNT020A Datasheet (PDF)

Bulletin PD-20699 rev. A 12/02 80CNT020A TRENCH SCHOTTKY RECTIFIER New GenIII D-61 Package Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM range IFSM VF TJ @ tp = 5 µs sine @ 40 Apk, TJ = 150°C (per leg) range - 55 to 150 °C 20 5300 0.21 V A V 80 Amp Description/ Features Units A The center tap Schottky rectifier module series has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable o.

  80CNT020A   80CNT020A



Document
Bulletin PD-20699 rev. A 12/02 80CNT020A TRENCH SCHOTTKY RECTIFIER New GenIII D-61 Package Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM range IFSM VF TJ @ tp = 5 µs sine @ 40 Apk, TJ = 150°C (per leg) range - 55 to 150 °C 20 5300 0.21 V A V 80 Amp Description/ Features Units A The center tap Schottky rectifier module series has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150° C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 150° C TJ operation Center tap module Very low forward voltage drop High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance High frequency operation Guard ring for enhanced ruggedness and long term reliability Value 80 New fully transfer-mould low profile, small footprint, high current package Case Styles 80CNT...A 80CNT...ASM 80CNT...ASL D61-8 D61-8-SM D61-8-SL www.irf.com 1 80CNT020A Bulletin PD-20699 rev. A 12/02 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) @ 125°C @ 150°C 80CNT020A 20 13 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM EAS IAR Surge Current (Per Leg) Non-RepetitiveAvalancheEnergy(PerLeg) Repetitive Avalanche Current (Per Leg) (Per Leg) (Per Device) Values Units 40 80 5300 700 4.5 1 A Conditions 50% duty cycle @ TC = 137°C, rectangular wave form 5µs Sine or 3µs Rect. pulse Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied Max. Peak One Cycle Non-Repetitive A mJ A TJ = 25 °C, IAS = 1 Amps, L = 4.5 mH Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM Max. Forward Voltage Drop (Per Leg) (1) Typ 0.33 0.39 0.24 0.31 0.21 0.29 Max 0.37 0.45 0.27 0.36 0.25 0.34 5.0 950 750 800 2500 5500 5.5 10000 Units V Conditions @ 40A @ 80A @ 40A @ 80A @ 40A @ 80A TJ = 150°C VR = rated VR VR = rated VR VR = 3.3V VR = 5V VR = 10V TJ = 125°C TJ = 25°C IRM Max. Reverse Leakage Current (Per Leg) (1) 2.5 640 480 530 1630 mA TJ = 25°C TJ = 125°C TJ = 125°C TJ = 125°C TJ = 150°C CT LS Max. Junction Capacitance (Per Leg) Typical Series Inductance (Per Leg) - pF nH VR=10VDC(test signal range100KHz to1MHz)25°C Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change V/µs (Rated VR) (1) Pulse Width < 300µs, Duty Cycle < 2% Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range 80CNT -55 to 125 -55 to 150 0.50 0.42 0.30 7.8 (0.28) Min. Max. 40 (35) 58 (50) Units °C °C °C/W °C/W °C/W g (oz.) Kg -cm (Ibf-in) Conditions RthJC Max. Thermal Resistance Junction to Case (Per Leg) RthJC Max. Thermal Resistance Junction to Case (Per Package) RthCS Typical Thermal Resistance, Case t.


80CNQSM 80CNT020A 80CPQ150


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)