DatasheetsPDF.com

MAX1185

Part Number	MAX1185
Manufacturer	Maxim
Description	Low-Power ADC
Published	May 6, 2005
Detailed Description	19-2175; Rev 3; 5/11 MAX1185 Dual 10-Bit, 20Msps, 3V, Low-Power ADC with Internal Reference and Multiplexed Parallel O...
Datasheet	MAX1185 PDF File

Overview

19-2175; Rev 3; 5/11 MAX1185 Dual 10-Bit, 20Msps, 3V, Low-Power ADC with Internal Reference and Multiplexed Parallel Outputs General Description The MAX1185 is a 3V, dual 10-bit analog-to-digital converter (ADC) featuring fully-differential wideband trackand-hold (T/H) inputs, driving two pipelined, nine-stage ADCs.
The MAX1185 is optimized for low-power, high dynamic performance applications in imaging, instrumentation, and digital communication applications.
This ADC operates from a single 2.
7V to 3.
6V supply, consuming only 105mW while delivering a typical signal-tonoise ratio (SNR) of 59.
5dB at an input frequency of 7.
5MHz and a sampling rate of 20Msps.
Digital outputs A and B are upd...

Similar Datasheet

MAX110 Low-Cost / 2-Channel / 14-Bit Serial ADCs - Maxim
MAX1101 Single-Chip / 8-Bit CCD Digitizer - Maxim
MAX11014 Automatic RF MESFET Amplifier Drain-Current Controllers - Maxim Integrated Products
MAX11015 Automatic RF MESFET Amplifier Drain-Current Controllers - Maxim Integrated Products
MAX1102 8-Bit CODECs - Maxim
MAX1103 8-Bit CODECs - Maxim Integrated
MAX1104 8-Bit CODECs - Maxim Integrated
MAX11040 Sigma-Delta ADC - Maxim Integrated Products
MAX11040K (MAX11040K / MAX11060) Sigma-Delta ADCs - Maxim Integrated Products
MAX11041 (MAX11041 / MAX11042) Wired Remote Controllers - Maxim Integrated Products

Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)