DatasheetsPDF.com

MAX7375

Part Number	MAX7375
Manufacturer	Maxim
Description	3-Pin Silicon Oscillator
Published	May 2, 2005
Detailed Description	19-3060; Rev 2; 7/04 3-Pin Silicon Oscillator General Description The MAX7375 is a silicon oscillator, intended as a lo...
Datasheet	MAX7375 PDF File

Overview

19-3060; Rev 2; 7/04 3-Pin Silicon Oscillator General Description The MAX7375 is a silicon oscillator, intended as a lowcost improvement replacing ceramic resonators, crystals, and crystal oscillator modules used as the clock source for microcontrollers and UARTs in 3V, 3.
3V, and 5V applications.
The MAX7375 is a fully integrated oscillator, supplied at specific factory-trimmed frequencies with a Rail-toRail® 50% duty cycle square-wave output.
The oscillator frequency is generated directly without the use of a phase-locked loop (PLL).
No additional components are used to set or adjust the frequency.
Unlike typical crystal and ceramic resonator oscillator circuits, the MAX7375 is highly resi...

Similar Datasheet

MAX730 5V / Step-Down / Current-Mode PWM DC-DC Converters - Maxim
MAX7300 20-Port or 28-Port I/O Expander - Maxim
MAX7301 20-Port and 28-Port I/O Expander - Maxim
MAX730A Current-Mode PWM DC-DC Converters - Maxim Integrated
MAX731 +5V/Adjustable Step-Up Current-Mode DC-DC Converters - Maxim
MAX7310 2-Wire-Interfaced 8-Bit I/O Port Expander - Maxim Integrated Products
MAX7311 2-Wire-Interfaced 16-Bit I/O Port Expander - Maxim Integrated Products
MAX7312 2-Wire-Interfaced 16-Bit I/O Port Expander - Maxim
MAX7313 16-Port I/O Expander - Maxim Integrated Products
MAX7314 18-Port GPIO - Maxim Integrated Products

Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)