MAX701

MAX700/MAX701/MAX702 Power-Supply Monitor with Reset General Description The MAX700/MAX701/MAX702 are supervisory circuits used to monitor the power supplies in microprocessor (µP) and digital systems. The RESET/RESET outputs of the MAX700/MAX701/MAX702 are guaranteed to be in the correct state for VCC voltages down to +1V (Figure 4). They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5V-powered circuits. The MAX702 is the simplest part in the family. When VCC falls to 4.65V, RESET goes low. The MAX702 also provides a debounced manual-reset input. The MAX701 performs the same functions but has both RESET and RESET outputs. Their primary function is to provide a system reset. Accordingly, an active reset signal is supplied for low supply voltages and for at least 200ms after the supply voltage reaches its operating value. In addition to the features of the MAX701 and MAX702, the MAX700 provides preset or adjustable-voltage detection so thresholds other than 4.65V can be selected, and adjustable hysteresis. All parts are supplied in 8-pin PDIP and narrow-SO packages in commercial and extended temperature ranges. Applications ●● Computers ●● Controllers ●● Intelligent Instruments ●● Critical µP Power Monitoring Pin Configurations Features ●● Min 200ms RESET Pulse on Power-Up, PowerDown, and During Low-Voltage Conditions ●● Reset Threshold Factory Trimmed for +5V Systems ●● No External Components or Adju...