MAX914

19-2064; Rev 0; 6/01 40ns, Low-Power, 3V/5V, Rail-to-Rail Single-Supply Comparators General Description The MAX9140/MAX9141 are single and the MAX9142/ MAX9144 are dual/quad high-speed comparators optimized for systems powered from a 3V or 5V supply. The MAX9141 features latch enable and device shutdown. These devices combine high speed, low power, and Rail-to-Rail® inputs. Propagation delay is 40ns, while supply current is only 150µA per comparator. The input common-mode range of the MAX9140/ MAX9141/MAX9142/MAX9144 extends beyond both power-supply rails. The outputs pull to within 0.3V of either supply rail without external pullup circuitry, making these devices ideal for interface with both CMOS and TTL logic. All input and output pins can tolerate a continuous short-circuit fault condition to either rail. Internal hysteresis ensures clean output switching, even with slow-moving input signals. The MAX9140/MAX9141/MAX9142/MAX9144 are higher-speed, lower-power, and lower-cost upgrades to industry-standard comparators MAX941/MAX942/ MAX944. The MAX9140 are offered in tiny 5-pin SC70 and SOT23 packages. The MAX9141 and MAX9142 are available in 8-pin SOT23 and SO packages, while the MAX9144 is available in both 14-pin SO and TSSOP packages. Features o Fast, 40ns Propagation Delay (10mV Overdrive) o Low Power: 0.45mW Power Dissipation Per Comparator (3V) 150µA Supply Current o Optimized for 3V and 5V Applications (Operation Down to 2.7V) o Rail-to-Rail Input Voltage Range o Lo...