ISA Bus (AT bus)
ISA Bus (AT bus)
MCR60 Series sFeatures
1. Standard
Compliant with ISA bus (AT bus) standard
2. Connector Type
The cont...
Description
ISA Bus (AT bus)
MCR60 Series sFeatures
1. Standard
Compliant with ISA bus (AT bus) standard
2. Connector Type
The contact pitch is 2.54mm, and the connector has 98 contacts.
3. Board Mounting Type
Straight through hole, right angle through hole types are available.
4. Prevents mis-insertion in the board
Using the polarizing key prevents mis-insertion in the printed board.
sProduct Specifications
Rating Current rating: 3A Operating Temperature Range: -30 to +85ç (Note 1) Storage Temperature Range: -10 to +60ç (Note 2) Voltage rating: 300V AC Operating Humidity Range: 40 to 80% Storage Humidity Range: 40 to 70% (Note 2)
Item 1.Insulator Resistance 3.Contact Resistance 4.Vibration 1000M ohms min. 30m ohms max.
Specification 500V DC 1000V AC/1 minute. 100mA
Condition
2.Withstanding Voltage No flashover or insulation breakdown. No electrical discontinuity of 10µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40ç and humidity of 90% to 95% (-65ç : 30 minutes¡15 to 35ç: 5 minutes max.¡ 125ç : 30 minutes¡15 to 35ç: 5 minutes max.) 5 cycles
5.Humidity(Steady state) Insulation resistance : 1000M ohms min. 6.Temperature Cycle No damage, cracks, or parts looseness.
500 cycles 7.Durability (Mating/un-mating) Contact resistance : 30m ohms max. 8.Resistance to Soldering heat No deformation of components affecting performance. Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise cause...
Similar Datasheet