Document
74LVX04 Low Voltage Hex Inverter
May 1993 Revised March 1999
74LVX04 Low Voltage Hex Inverter
General Description
The LVX04 contains six inverters. The inputs tolerate voltages up to 7V allowing the interface of 5V systems to 3V systems.
Features
s Input voltage level translation from 5V to 3V s Ideal for low power/low noise 3.3V applications s Guaranteed simultaneous switching noise level and dynamic threshold performance
Ordering Code
Order Number 74LVX04M 74LVX04SJ 74LVX04MTC Package Number M14A M14D MTC14 Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150” Narrow 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 14-Lead Thin Shrink Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code.
Logic Symbol
IEEE/IEC
Connection Diagram
Pin Descriptions
Pin Names An On Description Inputs Outputs
© 1999 Fairchild Semiconductor Corporation
DS011601.prf
www.fairchildsemi.com
74LVX04
Absolute Maximum Ratings(Note 1)
Supply Voltage (VCC) DC Input Diode Current (IIK) VI = −0.5V DC Input Voltage (VI) DC Output Diode Current (IOK) VO = −0.5V VO = VCC + 0.5V DC Output Voltage (VO) DC Output Source or Sink Current (IO) DC VCC or Ground Current (ICC or IGND) Storage Temperature (TSTG) Power Dissipation ±50 mA −65°C to +150°C 180 mW ±25 mA −20 mA +20 mA −0.5V to VCC + 0.5V −20 mA −0.5V to 7V −0.5V to +7.0V
Recommended Operating Conditions (Note 2)
Supply Voltage (VCC) Input Voltage (VI) Output Voltage (VO) Operating Temperature (TA) Input Rise and Fall Time (∆t/∆V) 2.0V to 3.6V 0V to 5.5V 0V to VCC −40°C to +85°C 0 ns/V to 100 ns/V
Note 1: The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 2: Unused inputs must be held HIGH or LOW. They may not float.
DC Electrical Characteristics
Symbol VIH Parameter HIGH Level Input Voltage VIL LOW Level Input Voltage VOH HIGH Level Output Voltage VOL LOW Level Output Voltage IIN ICC Input Leakage Current Quiescent Supply Current VCC 2.0 3.0 3.6 2.0 3.0 3.6 2.0 3.0 3.0 2.0 3.0 3.0 3.6 3.6 1.9 2.9 2.58 0.0 0.0 0.1 0.1 0.36 ±0.1 2.0 2.0 3.0 TA = +25°C Min 1.5 2.0 2.4 0.5 0.8 0.8 1.9 2.9 2.48 0.1 0.1 0.44 ±1.0 20.0 µA µA V V Typ Max TA = −40°C to +85°C Min 1.5 2.0 2.4 0.5 0.8 0.8 VIN = VIL or VIH IOH = −50 µA IOH = −50 µA IOH = −4 mA VIN = VIL or VIH IOL = 50 µA IOL = 50 µA IOL = 4 mA VIN = 5.5V or GND VIN = VCC or GND V V Max Units Conditions
Noise Characteristics
Symbol VOLP VOLV VIHD VILD Parameter
(Note 3)
VCC (V) 3.3 3.3 3.3 3.3 TA = 25°C Typ 0.3 −0.3 Limit 0.5 −0.5 2.0 0.8 V V V V Units CL (pF) 50 50 50 50
Quiet Output Maximum Dynami.