DatasheetsPDF.com

MF0032M-11ATXX Dataheets PDF



Part Number MF0032M-11ATXX
Manufacturers Mitsubishi
Logo Mitsubishi
Description 8/16-bit Data Bus Flash ATA PC Card
Datasheet MF0032M-11ATXX DatasheetMF0032M-11ATXX Datasheet (PDF)

MITSUBISHI STORAGE CARD Preliminary ATA PC CARDS 8/16-bit Data Bus Flash ATA PC Card Connector Type Two-piece 68-pin MF0032M-11ATxx MF0064M-11ATxx MF0128M-11ATxx MF0192M-11ATxx MF0256M-11ATxx MF0320M-11ATxx MF0384M-11ATxx MF0448M-11ATxx MF0512M-11ATxx FEATURES DESCRIPTION Mitsubishi’s Flash ATA cards provide large memory capacities on a device approximately the size of a credit card (85.6mm(L) × 54mm(W) × 3.3mm(T) or 5mm(T)). The cards use an 8/16 bit data bus. Available in 32MB - 512MB ca.

  MF0032M-11ATXX   MF0032M-11ATXX



Document
MITSUBISHI STORAGE CARD Preliminary ATA PC CARDS 8/16-bit Data Bus Flash ATA PC Card Connector Type Two-piece 68-pin MF0032M-11ATxx MF0064M-11ATxx MF0128M-11ATxx MF0192M-11ATxx MF0256M-11ATxx MF0320M-11ATxx MF0384M-11ATxx MF0448M-11ATxx MF0512M-11ATxx FEATURES DESCRIPTION Mitsubishi’s Flash ATA cards provide large memory capacities on a device approximately the size of a credit card (85.6mm(L) × 54mm(W) × 3.3mm(T) or 5mm(T)). The cards use an 8/16 bit data bus. Available in 32MB - 512MB capacities, Mitsubishi’s Flash ATA cards conform to the JEIDA/PCMCIA standard. In default mode, the ATA card operates in PC Card compliant sockets. It conforms to PCMCIA 2.1,JEIDA 4.2 and PC Card Standard. When the OE# signal is asserted low level by the Host system in power on cycle, the Mitsubishi’s Flash ATA cards can be selected in a IDE ATA interface. It uses the ATA command set so no software drivers are required. • 68pin PC Card Standard Type-I PC Card • Single 5V or 3.3V Supply • Card density of up to 512MB maximum • Four PC Card ATA and IDE ATA modes • Nonvolatile, No Batteries Required • High reliability based on internal ECC function • Fast read/write performance(Target) Read:1.5MB/s Write:1.6MB/s(128 - 512MB) Write:850kB/s(64MB) Write:450kB/s(32MB) Read:1.8MB/s Write:1.7MB/s(128MB - 512MB) Write:1.0MB/s(64MB) Write:550kB/s(32MB) 300,000 program/erase cycles • APPLICATIONS • Computers • Digital Camera • Data Communication • Office Automation • Industrial • Consumer MITSUBISHI ELECTRIC 1 June.2001 Rev. 1.3 MITSUBISHI STORAGE CARD Preliminary MF0XXXX-11ATXX series ATA PC CARDS PRODUCT LIST Memory capacity (Bytes) MF0032M-11ATxx MF0064M-11ATxx MF0128M-11ATxx MF0192M-11ATxx MF0256M-11ATxx MF0320M-11ATxx MF0384M-11ATxx MF0448M-11ATxx MF0512M-11ATxx 32,047,104 64,094,208 128,188,416 192,151,552 256,376,832 319,979,520 384,491,520 448,487,424 512,483,328 8/16 Data Bus width(bits) Memory 256Mbit Flash x 1 256Mbit Flash x 2 256Mbit Flash x 4 256Mbit Flash x 6 256Mbit Flash x 8 256Mbit Flash x 10 256Mbit Flash x 12 256Mbit Flash x 14 256Mbit Flash x 16 Cylinder 489 978 978 733 978 620 745 869 993 Head 4 4 8 16 16 16 16 16 16 Sector 32 32 32 32 32 63 63 63 63 Type I Out line MITSUBISHI ELECTRIC 2 June.2001 Rev. 1.3 MITSUBISHI STORAGE CARD Preliminary MF0XXXX-11ATXX series ATA PC CARDS PIN ASSIGNMENT Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 PC Card Memory Mode Signal I/O GND D3 D4 D5 D6 D7 CE1# A10 OE# N.C A9 A8 N.C N.C WE# READY Vcc N.C N.C N.C N.C A7 A6 A5 A4 A3 A2 A1 A0 D0 D1 D2 WP GND I/O I/O I/O I/O I/O I I I I I I O I I I I I I I I I/O I/O I/O O PC Card I/O Mode Signal I/O GND D3 D4 D5 D6 D7 CE1# A10 OE# N.C A9 A8 N.C N.C WE# IREQ# Vcc N.C N.C N.C N.C A7 A6 A5 A4 A3 A2 A1 A0 D0 D1 D2 IOIS16# GND I/O I/O I/O I/O I/O I I I I I I O I I I I I I I I I/O I/O I/O O IDE ATA Interface Signal I/O GND D3 D4 D5 D6 D7 CS0# N.U ATA SEL# N.C N.U N.U N.C N.C WE# INTRQ Vcc N.C N.C N.C N.C N.U N.U N.U N.U N.U A2 A1 A0 D0 D1 D2 IOCS16# GND I/O I/O I/O I/O I/O I I I O I I I I/O I/O I/O O Pin 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 PC Card Memory Mode Signal I/O GND CD1# D11 D12 D13 D14 D15 CE2# VS1# N.U N.U N.C N.C N.C N.C N.C Vcc N.C N.C N.C N.C CSEL VS2# RESET WAIT# N.U REG# BVD2 BVD1 D8 D9 D10 CD2# GND O I/O I/O I/O I/O I/O I O I O I O I O O I/O I/O I/O O PC Card I/O Mode Signal I/O GND CD1# D11 D12 D13 D14 D15 CE2# VS1# IORD# IOWR# N.C N.C N.C N.C N.C Vcc N.C N.C N.C N.C CSEL VS2# RESET WAIT# INPACK# REG# SPKR# STSCHG# D8 D9 D10 CD2# GND O I/O I/O I/O I/O I/O I O I I I O I O O I O O I/O I/O I/O O IDE ATA Interface Signal I/O GND CD1# D11 D12 D13 D14 D15 CS1# VS1# IORD# IOWR# N.C N.C N.C N.C N.C Vcc N.C N.C N.C N.C CSEL VS2# RESET# IORDY INPACK# REG# DASP# PDIAG# D8 D9 D10 CD2# GND O I/O I/O I/O I/O I/O I O I I I O I O O I I/O I/O I/O I/O I/O O - N.C = Not connected internally. N.U = Not used. MITSUBISHI ELECTRIC 3 June.2001 Rev. 1.3 MITSUBISHI STORAGE CARD Preliminary MF0XXXX-11ATXX series ATA PC CARDS Signal Description Signal Name Address bus[A10-A0] I/O I Pin No. 8, 11, 12, 22, 23, 24, 25, 26, 27, 28, 29 41, 40, 39, 38, 37, 66, 65, 64, 6, 5, 4, 3, 2 ,32,31, 30 7, 42 Description Signals A10-A0 are address bus. A0 is invalid in word mode. A10 is the MSB and A0 is the LSB. Signals D15-D0 are data bus. D0 is the LSB of the Even Byte of the Word. D8 is the LSB of the Odd Byte of the Word. CE1# and CE2# are low active card select signals. Data bus[D15-D0] I/O Card Enable[CE1#, CE2#] (PC Card Memory Mode) Card Enable[CE1#, CE2#] (PC Card I/O Mode) Chip Select[CS0#, CS1#] (IDE ATA Interface) Output Enable[OE#] (PC Card Memory Mode) Output Enable[OE#] (PC Card I/O Mode) ATA SEL# (IDE ATA Interface) Write Enable[WE#] (PC Card Memory Mode) Write Enable[WE#] (PC Card I/O Mode) Write Enable[WE#] (IDE ATA Interface) I/O Read[IORD#] (PC Card I/O Mode) I/O Read[IORD#] (IDE AT.


MF0032M-05AAXX MF0032M-11ATXX MF0045M-03ATxx


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)