Document
19-1408; Rev 1; 3/99
Precision, Micropower, Low-Dropout Voltage References
General Description
The MAX6190–MAX6195/MAX6198 precision, micropower, low-dropout voltage references offer high initial accuracy and very low temperature coefficient through a proprietary curvature-correction circuit and lasertrimmed precision thin-film resistors. These series-mode bandgap references draw a maximum of only 35µA quiescent supply current, making them ideal for battery-powered instruments. They offer a supply current that is virtually immune to input voltage variations. Load-regulation specifications are guaranteed for source and sink currents up to 500µA. These devices are internally compensated, making them ideal for applications that require fast settling, and are stable with capacitive loads up to 2.2nF. o ±2mV (max) Initial Accuracy o 5ppm/°C (max) Temperature Coefficient o 35µA (max) Supply Current o 100mV Dropout at 500µA Load Current o 0.12µV/V Load Regulation o 8µV/V Line Regulation
Features
MAX6190–MAX6195/MAX6198
Applications
Hand-Held Instruments Analog-to-Digital and Digital-to-Analog Converters Industrial Process Control Precision 3V/5V Systems Hard-Disk Drives
Selector Guide
PART MAX6190A MAX6190B MAX6190C MAX6191A MAX6191B MAX6191C MAX6192A MAX6192B MAX6192C MAX6193A MAX6193B MAX6193C MAX6198A MAX6198B MAX6198C MAX6194A MAX6194B MAX6194C MAX6195A MAX6195B MAX6195C OUTPUT VOLTAGE (V) 1.250 1.250 1.250 2.048 2.048 2.048 2.500 2.500 2.500 3.000 3.000 3.000 4.096 4.096 4.096 4.500 4.500 4.500 5.000 5.000 5.000 INITIAL ACCURACY (mV) ±2 ±4 ±6 ±2 ±5 ±10 ±2 ±5 ±10 ±2 ±5 ±10 ±2 ±5 ±10 ±2 ±5 ±10 ±2 ±5 ±10 TEMPERATURE COEFFICIENT (ppm) <5 <10 <25 <5 <10 <25 <5 <10 <25 <5 <10 <25 <5 <10 <25 <5 <10 <25 <5 <10 <25
Ordering Information
PART MAX6190AESA MAX6190BESA MAX6190CESA MAX6191AESA MAX6191BESA MAX6191CESA MAX6192AESA MAX6192BESA MAX6192CESA TEMP. RANGE -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C PIN-PACKAGE 8 SO 8 SO 8 SO 8 SO 8 SO 8 SO 8 SO 8 SO 8 SO
Ordering Information continued at end of data sheet.
Pin Configuration
TOP VIEW
N.C. 1 IN 2 N.C. 3 8 N.C. N.C. OUT N.C.
MAX6190– MAX6195 MAX6198
7 6 5
GND 4
Typical Operating Circuit appears at end of data sheet.
N.C. = NO CONNECTION
SO
________________________________________________________________ Maxim Integrated Products
1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800. For small orders, phone 1-800-835-8769.
Precision, Micropower, Low-Dropout Voltage References MAX6190–MAX6195/MAX6198
ABSOLUTE MAXIMUM RATINGS
Voltages Referenced to GND IN ......................................................................-0.3V to +13.5V OUT ..........................................................-0.3V to (VIN + 0.3V) Output Short Circuit to GND or IN (VIN < 6V) ............Continuous Output Short Circuit to GND or IN (VIN ≥ 6V) .....................60sec Continuous Power Dissipation (TA = +70°C) 8-pin SO (derate 5.88mW/°C above +70°C)................471mW Operating Temperature Range ...........................-40°C to +85°C Storage Temperature Range .............................-65°C to +150°C Lead Temperature (soldering, 10sec) .............................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—MAX6190
(VIN = +5V, IOUT = 0, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) PARAMETER OUTPUT MAX6190A Output Voltage VOUT TA = +25°C MAX6190A Output Voltage Temperature Coefficient (Note 1) Line Regulation Load Regulation Short-Circuit Current Temperature Hysteresis (Note 2) Long-Term Stability DYNAMIC Noise Voltage Ripple Rejection Turn-On Settling Time Capacitive-Load Stability Range INPUT Supply Voltage Range Quiescent Supply Current Change in Supply Current VIN IIN IIN/VIN 2.5V ≤ VIN ≤ 12.6V Guaranteed by line-regulation test 2.5 27 0.8 12.6 35 2 V µA µA/V eOUT VOUT/VIN tR COUT 0.1Hz to 10Hz 10Hz to 10kHz VIN = 5V ±100mV, f = 120Hz To 0.1%, COUT = 50pF (Note 3) 0 25 65 86 30 2.2 µVp-p µVRMS dB µs nF TCVOUT ∆VOUT/ ∆VIN ∆VOUT/ ∆IOUT ISC ∆VOUT/ cycle ∆VOUT/ time 1000hrs at +25°C MAX6190B MAX6190C 2.5V ≤ VIN ≤ 12.6V Sourcing: 0 ≤ IOUT ≤ 500µA Sinking: -500µA ≤ IOUT ≤ 0 Short to GND Short to IN MAX6190B MAX6190C 1.248 1.246 1.244 1.250 1.250 1.250 2 4 8 8 0.12 0.15 4 4 75 50 1.252 1.254 1.256 5 10 25 80 0.5 0.6 µV/V µV/µA mA ppm ppm/ 1000hrs ppm/°C V SYMBOL CONDITIONS MIN TYP MAX UNITS
2
_______________________________________________________________________________________
Precision, Micropower, Low-Dropout Volt.