12-Bit / Low-Power / Dual / Voltage-Output DAC with Serial Interface
19-2124; Rev 2; 7/03
12-Bit, Low-Power, Dual, Voltage-Output DAC with Serial Interface
General Description
The MAX5722 ...
Description
19-2124; Rev 2; 7/03
12-Bit, Low-Power, Dual, Voltage-Output DAC with Serial Interface
General Description
The MAX5722 dual,12-bit, low-power, buffered voltageoutput, digital-to-analog converter (DAC) is packaged in a space-saving 8-pin µMAX package (5mm ✕ 3mm). The wide supply voltage range of +2.7V to +5.5V and 112µA supply current accommodates low-power and low-voltage applications. DAC outputs employ on-chip precision output amplifiers that swing Rail-to-Rail®. The MAX5722’s reference input accepts a voltage range from 0 to VDD. In power-down, the reference input is high impedance, further reducing the system’s total power consumption. The 20MHz, 3-wire SPI™, QSPI™, MICROWIRE™, and DSP-compatible serial interface save board space and reduce the complexity of opto- and transformer-isolated applications. The MAX5722 on-chip power-on reset (POR) circuit resets the DAC outputs to zero and loads the output with a 100kΩ resistor to ground. This provides additional safety for applications that drive valves or other transducers that need to be off on power-up. The MAX5722’s software-controlled power-down reduces supply current to less than 0.3µA and provides software-selectable output loads (1kΩ, 100kΩ, or high impedance) while in power-down. The MAX5722 is specified over the -40°C to +125°C automotive temperature range. o Ultra-Low Power Consumption 112µA at VDD = +3.6V 135µA at VDD = +5.5V o Wide +2.7V to +5.5V Single-Supply Range o 8-Pin µMAX Package o 0.3µA Power-Down Curren...
Similar Datasheet