MAX4839

19-3044; Rev 0; 10/03 Overvoltage Protection Controllers with Status FLAG General Description The MAX4838–MAX4841 are overvoltage protection ICs that protect low-voltage systems against voltages of up to 28V. If the input voltage exceeds the overvoltage trip level, the MAX4838–MAX4841 turn off the low-cost external N-channel FET(s) to prevent damage to the protected components. An internal charge pump eliminates the need for external capacitors and drives the FET gate for a simple, robust solution. The MAX4838/MAX4839 have a 7.4V overvoltage threshold, and the MAX4840/MAX4841 have a 5.8V overvoltage threshold. All devices have an undervoltage lockout threshold of 3.25V. In addition to the single FET configuration, the devices can be configured with back-to-back external FETs to prevent currents from being back-driven into the adapter. On power-up, the device waits for 50ms before driving GATE high. FLAG is held low for an additional 50ms after GATE goes high before deasserting. The MAX4838/MAX4840 have an open-drain FLAG output, and the MAX4839/MAX4841 have a push-pull FLAG output. The FLAG output asserts immediately to an overvoltage fault. Additional features include a 15kV ESD-protected input (when bypassed with a 1µF capacitor) and a shutdown pin (EN) to turn off the device (MAX4838/MAX4840). All devices are offered in a small 6-pin SC70 package and are specified for operation from -40°C to +85°C. o Overvoltage Protection Up to 28V o Preset 7.4V or 5.8V Overvoltage Trip ...