Low-Voltage / Combination Single-Ended 8-to-1/Differential 4-to-1 Multiplexer
19-1385; Rev 0; 10/98
Low-Voltage, Combination Single-Ended 8-to-1/Differential 4-to-1 Multiplexer
General Description
...
Description
19-1385; Rev 0; 10/98
Low-Voltage, Combination Single-Ended 8-to-1/Differential 4-to-1 Multiplexer
General Description
The MAX4598 low-voltage, CMOS analog IC is a configurable single-ended 8-to-1/differential 4-to-1 multiplexer. In addition to the input channels, both V+ and GND can be switched to the output channels, enabling the supply voltages to be monitored. The MAX4598 operates from a single +2.7V to +12V supply or from dual ±6V supplies. The device has low on-resistance (75Ω max) and TTL-compatible logic inputs from either ±5V or a single +5V supply. Each switch can handle Rail-to-Rail ® analog signals. The MAX4598 has two modes of operation: as a standard multiplexer and as a “latchable” multiplexer where the address lines are strobed. The off-leakage current is only 0.1nA at TA = +25°C and 2nA at TA = +85°C. ESD protection is > 2kV per Method 3015.7. The MAX4598 is available in small 20-pin SSOP, SO, and DIP packages.
Features
o V+ and GND Can Be Switched to the Output Channels o 75Ω (max) On-Resistance o Single-Ended or Differential Operation o 2pC (typ) Charge Injection o Latched or Unlatched Operation o TTL-Compatible Logic Inputs at ±5V Supply o Handles Rail-to-Rail Analog Signals
MAX4598
Ordering Information
PART MAX4598CAP TEMP. RANGE 0°C to +70°C PIN-PACKAGE 20 SSOP 20 Wide SO 20 Plastic DIP Dice* 20 SSOP 20 Wide SO 20 Plastic DIP
Applications
ADC Systems Battery-Operated Equipment Test Equipment Avionics Audio-Signal Routing Networking
MAX4598CWP 0°C t...
Similar Datasheet