High IP3 Mixer with LO Amplifier 823 - 851 MHz
High IP3 Mixer with LO Amplifier 823 - 851 MHz
Rev B
MAMXES0075
Features: • Very High IP3, • SMT footprint • 0dBm LO d...
Description
High IP3 Mixer with LO Amplifier 823 - 851 MHz
Rev B
MAMXES0075
Features: Very High IP3, SMT footprint 0dBm LO drive
SM-106
>+30dBm
2
4
6
8 10 12 14
Description
M/A Com’s MAMXES0075 uses a novel PHEMT FET design to achieve very high linearity without external biasing. A Low Noise Amplifier is included at the LO port which is saturated during operation.
1 3 5 7 9 11 13
Dimensions in inches [mm]
Tolerance: .xx ± .02, .xxx ± .010
Ordering Information
Part Number MAMXES0075 Package Tape & Reel
Electrical Specifications: 25°C, Impedance = 50 O, DC Bias = 5V +/-0.3V, LO drive = 0dBm +/-2dBm
Parameter Frequency Range Frequency (MHz) RF: 823-851 LO: 735-762 IF: 85-90 823-851 735-762 735-762 823-851 735-762 823-851 85-90 Downconverting dB dB dB dB dBm dBm 0 25.0 20.0 30.0 8.4 5.0 30.0 25.0 2.0 1.5 1.5 34.0 20.0 8.8 Units Minimum Typical Maximum
Conversion loss L-R Isolation L-I Isolation R-I Isolation LO VSWR RF VSWR IF VSWR Input IP3 1dB Compression
1
High IP3 Mixer with LO amp, 823 — 851 MHz
MAMXES0075
Absolute Maximum Ratings
Parameter RF input power Peak IF current Operating temperature Storage temperature Maximum 200mW 130mA -40°C - +85°C -40°C - +85°C
Pin Configuration
Function RF LO IF Ground DC Pin # 14 2 13 1,3,4,5,6,7,9,10,11,12 8
Specification subject to change without notice. North America: (800) 366-2266 Asia/Pacific: +81-44-844-8296 Europe: +44 (1344) 869 595 Visit www.macom.com for additional datasheets and information.
2
...
Similar Datasheet