EDFA Gain Block for DWDM Applications
PGE 608 31
EDFA Gain Block for DWDM Applications
Key Features
• Operating wavelength window: 1530-1560 nm • Operating ...
Description
PGE 608 31
EDFA Gain Block for DWDM Applications
Key Features
Operating wavelength window: 1530-1560 nm Operating temperature range: -5 °C to +70 °C (with cooled pump) Compact size (88 x 70 x 12 mm)
Applications
Ideal for Metro DWDM networks, providing up to 13 dBm output power
Description
This EDFA gain block provides cost effective amplification over the Cband wavelength range. With its simple configuration and very small size it is optimized as a booster for Metro DWDM applications.
PGE 608 31
Optical input signal
Optical gain
Optical output signal
14 pin electrical interface
Figure 1. Block diagram
Output
PGE 608 31 Erbium Doped Fiber Amplifier
Input
Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Description Thermistor, pump Laser anode TEC neg GND Pump monitor anode NC NC Thermistor, pump Laser cathode TEC pos GND Pump monitor cathode NC NC
Figure 2. Mechanical Outline Drawing and Pin Connection
2
12
PGE 608 31
Optical Characteristics
Electrical and optical characteristics over recommended operating conditions, unless otherwise noted.
Parameter Conditions Symbol
Operating Wavelength Input Power Output Power Noise Figure Gain Flatness
@ PIL=-6 dBm @ λL @ PIL=-6 dBm @ λL (Note1)
λL PIL Pout NF GFLAT
Min
Typ
Max
Unit
1530 -9 12 -1
-6 13 6
1560 0 8 1
nm dBm dB dB
Note 1. GFLAT=(GMAX-GMIN)/2, where GMAX is the maximum gain for λL and GMIN is the minimum gain for λL. The gain is measured as dynamic gain under constant saturation between 1540 and 1...
Similar Datasheet