EDFA Gain Block for DWDM Applications
PGE 608 30
EDFA Gain Block for DWDM Applications
Key Features
• Operating wavelength window: 1540-1560 nm • Operating t...
Description
PGE 608 30
EDFA Gain Block for DWDM Applications
Key Features
Operating wavelength window: 1540-1560 nm Operating temperature range: -5 °C to 70 °C (with cooled pump) Small size (120x80x15 mm)
Applications
Ideal for Metro DWDM networks up to 8 channels
Description
A cost effective, small sized EDFA gain block for Metro applications. Booster, line-, and pre-amplifier configurations are available.
1
PGE 608 30
Optical input signal
Optical gain
Optical output signal
28 pin electrical interface
Figure 1. Block diagram
Base View
39
47.5 39
Output 8 1 14 7
R26 (x4)
22 15
28 21
4 x M3 (5.6 deep) Pin type: Molex Milli-Grid (87089-1416) or equivalent. 2.00 mm Pitch 2 x 7 Pins
2.0
80 2.0 40
0.50 x 0.50 square (2 x 7)
Input
10
50
23.75 100
Note: 1. Dimensions in mm 2. Tolerance ± 0.15 mm
Side View
3.5 15
Top View
120
Output
Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15-17 18 19-24 25 26-28
Function Thermistor, Pump Laser Anode, Pump TEC Neg., Pump GND Pump Monitor Anode, Pump NC Input Monitor Cathode Thermistor, Pump Laser Cathode, Pump TEC Pos., Pump GND Pump Monitor Cathode, Pump NC Input Monitor Anode NC GND NC GND NC
25
80
28 14
Input
Figure 2. Mechanical Outline Drawing and Pin Connection
2
PGE 608 30
Optical Characteristics
Electrical and optical characteristics over recommended operating conditions, unless otherwise noted.
Parameter Conditions Symbol
Operating Wavelength Measurement Wavelength Input Power Output Power Noise Figure Gain Flatne...
Similar Datasheet