EDFA Gain Block for DWDM Applications
PGE 608 17
EDFA Gain Block for DWDM Applications
Key Features
• Operating wavelength window: 1543-1558 nm • Gain flatne...
Description
PGE 608 17
EDFA Gain Block for DWDM Applications
Key Features
Operating wavelength window: 1543-1558 nm Gain flatness < ± 0.5dB Low noise figure, typ. <5.5 dB +13 dBm output power Input and output monitor diodes Operation temperature range: -5 °C to 70 °C Multisourced footprint Small size (120x80x15 mm)
Applications
Booster amplifier in single-channel or DWDM networks
Description
The DWDM gain block is intended to be used as a booster amplifier in WDM/ DWDM networks. The gain block has input and output power monitoring. The input and output ports have isolators to attenuate spurious reflections in the system. External electronic circutry is needed for biasing the pump laser and for controlling the pump laser temperature. Heat sink is provided via the bottom surface.
1
PGE 608 17
Optical input signal Input power monitor
Optical gain Output power monitor
Optical output signal
28 pin electrical interface
Optical output power monitor
Figure 1. Block diagram
Base View
39
Extra 8 1 14 7
47.5 39
Output
R26 (x4)
22 15
28 21
4 x M3 (5.6 deep) Pin type: Molex Milli-Grid (87089-1416) or equivalent. 2.00 mm Pitch 2 x 7 Pins
2.0
80 2.0 40
0.50 x 0.50 square (2 x 7)
Monitor output Input
10
50
23.75 100
Note: 1. Dimensions in mm 2. Tolerance ± 0.15 mm
Side View
3.5 15
Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16-17 18 19-21 22 23-24 25 26-28
Function Thermistor, Pump (GND) Laser Anode, Pump TEC Neg., Pump GND Pump Monitor Anode, Pump NC Input Monito...
Similar Datasheet