PGE60803

PGE 608 03 Erbium-Doped Fiber Amplifier for Digital Applications Key Features Operating wavelength window: 15301560 nm Saturation output power: +16 dBm Noise figure, typ. <7.0 dB Serial (RS-232) interface with parallel alarms Applications Single channel digital applications (SDH/SONET) Description The PGE 608 03 is an integrated, output power-locked amplifier. It has optically isolated input and output ports as well as input and output power monitoring. The serial and parallel interface is provided through a DB-25 electrical connector. The modules are based on industry standard platforms and are optimized for single channel SDH/SONET applications. 1 PGE 608 03 Optical input signal Input power monitor Gain Output power monitor Optical output signal Control Circuitry Alarm and monitor signals Set Commands Figure 1. Block diagram [mm] 15.5 37.8 48.5 129 4 x M3 118 150 Pin 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. Description NC NC NC NC Output Power Monitor Input Power Monitor GND Alarm #1 Optical Output Fault Alarm #2 Pump Drive Current Fault Alarm #3 Pump Temperature -5.0 V +5.0 V GND NC NC NC NC Serial output (TTL) Alarm #4 Optical Input Fault Eye-safe Power Control Input Amplifier Disable Input Serial input (TTL) -5.0 V +5.0 V GND. Figure 2. Mechanical outline and pin description 2 124 11 PGE 608 03 Optical Characteristics Electrical and optical characteristics at recommended operating condi...