PGD037S030CSA01

Previous PulseGuard ® Suppressors Polymeric ESD Suppressors PGD Series Connector Array ESD Suppressor With similar performance features as the surface mount ESD products, the connector array products provide the first line of defense against ESD events. For use in standard D-Subminiatures, these suppressors intercept the ESD pulses before they enter the electronic equipment. The pulses are shunted to the grounded shell of the connector and kept off of the circuit board. The connector configuration takes up zero board space and can also be used as a retrofit solution in cases where the ESD problem was identified after the board design was complete. Electrical Characteristics: Capacitance Leakage Current Off state Resistance Clamping Voltage Operating Voltage Peak Current Bi-directional Product Rated for 10,000 cycles <2 pF1 <0.1µA2 10 MΩ2 100V3, typical 24 VDC 45A, at 15 kV 4 PULSEGUARD® SUPPRESSORS 90° Angle Mount Front Mount PHYSICAL SPECIFICATIONS: Body Material: Polyimide Terminations: Spring contacts Voltage Variable Material: Littelfuse polymeric formula. Soldering Parameters: Press-in fitting, soldering not necessary. Packaging: Bulk, bagged and tagged. ENVIRONMENTAL SPECIFICATIONS: Operating Temperature: -65°C to 125°C Vibration: Withstands 10-55Hz per MIL-STD-202F, Method 201A and 10-2000Hz at 20 G’s per MIL-STD-202F, Method 204D, Condition D. Thermal Shock: Withstands 5 cycles of -50°C to 125°C ORDERING INFORMATION: 1 Tested at 1 Megahertz ...