Voltage Controlled SAW Oscillators
Integrated Circuit Systems
M650 Series
Voltage Controlled SAW Oscillators
M650 Series
Performance Specifications
DESCR...
Description
Integrated Circuit Systems
M650 Series
Voltage Controlled SAW Oscillators
M650 Series
Performance Specifications
DESCRIPTION
The M650 Series of Voltage Controlled SAW Oscillators is a low cost solution for many Telecom applications. An internal SAW filter provides jitter performance of less than 0.5psec (rms).
9mm
14mm
FEATURES
This device is specified for an operating temperature range of -40°C to +85°C. A disable feature forces the output into a static condition by applying a logic “0” to the clock enable input. The oscillator is housed in a hermetically-sealed, leadless surface mount package. The M650 Series of VCOs is available over an output frequency range of 155MHz to 900MHz. The device is most suited for phase-locked loop applications as well as clock and data recovery circuits.
Output Frequencies at 155MHz to 900MHz Low Phase Jitter, 0.5psec (rms) typical 3.3 Volt Supply Operation Complementary Outputs Output Disable Feature LCC Surface Mount Package (9 x 14mm)
APPLICATION
ABSOLUTE MAX RATINGS Operating Temp. Range (Case): ........................ -40°C to +85°C Storage Temp. Range (Ambient): .................... -55°C to +125°C Control Voltage Range: ................................................. 0 to VCC Output Current: ................................................................ 20 mA Power Supply Voltage (Vcc): ................................ 0 to +3.6 Vdc
Clock Smoothing for OC192/OC48/ OC12/OC3 Clock Smoothing for STS96/STS48/ STS12/STS3/STS1...
Similar Datasheet