Document
MC14093B
Quad 2-Input “NAND" Schmitt Trigger
The MC14093B Schmitt trigger is constructed with MOS P−channel and N−channel enhancement mode devices in a single monolithic structure. These devices find primary use where low power dissipation and/or high noise immunity is desired. The MC14093B may be used in place of the MC14011B quad 2−input NAND gate for enhanced noise immunity or to “square up” slowly changing waveforms.
Features
• Supply Voltage Range = 3.0 Vdc to 18 Vdc • Capable of Driving Two Low−Power TTL Loads or One
Low−Power Schottky TTL Load Over the Rated Temperature Range
• Triple Diode Protection on All Inputs • Pin−for−Pin Compatible with CD4093 • Can be Used to Replace MC14011B • Independent Schmitt−Trigger at each Input • NLV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable
• These Devices are Pb−Free and are RoHS Compliant
MAXIMUM RATINGS (Voltages Referenced to VSS)
Symbol
Parameter
Value
Unit
VDD Vin, Vout
DC Supply Voltage Range
Input or Output Voltage Range (DC or Transient)
−0.5 to +18.0 −0.5 to VDD + 0.5
V V
Iin, Iout Input or Output Current (DC or Transient) per Pin
±10 mA
PD Power Dissipation, per Package (Note 1)
500 mW
TA Ambient Temperature Range
Tstg Storage Temperature Range
TL Lead Temperature (8−Second Soldering)
−55 to +125 −65 to +150
260
°C °C °C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Temperature Derating: “D/DW” Packages: –7.0 mW/_C From 65_C To 125_C
This device contains protection circuitry to guard against damage due to high
static voltages or electric fields. However, precautions must be taken to avoid
applications of any voltage higher than maximum rated voltages to this
high−impedance circuit. For proper operation, Vin and Vout should be constrained to the range VSS ≤ (Vin or Vout) ≤ VDD.
Unused inputs must always be tied to an appropriate logic voltage level
(e.g., either VSS or VDD). Unused outputs must be left open.
http://onsemi.com
SOIC−14 D SUFFIX CASE 751A
SOEIAJ−14 F SUFFIX CASE 965
TSSOP−14 DT SUFFIX CASE 948G
PIN ASSIGNMENT
IN 1A IN 2A OUTA OUTB IN 1B IN 2B
VSS
1 2 3 4 5 6 7
14 VDD 13 IN 2D 12 IN 1D 11 OUTD 10 OUTC
9 IN 2C 8 IN 1C
MARKING DIAGRAMS
14 14
14093BG AWLYWW
MC14093B ALYWG
1 SOIC−14
1 SOEIAJ−14
14
14 093B ALYW G
G
1 TSSOP−14
A WL, L YY, Y WW, W G or G
= Assembly Location = Wafer Lot = Year = Work Week = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet.
© Semiconductor Components Industries, LLC, 2014
August, 2014 − Rev. 10
1
Publication Order Number: MC14093B/D
MC14093B
LOGIC DIAGRAM
1 2
3
5 6
4
8 9
10
12 13
VDD = PIN 14 VSS = PIN 7
11
EQUIVALENT CIRCUIT SCHEMATIC (1/4 OF CIRCUIT SHOWN)
ORDERING INFORMATION Device
Package
Shipping†
MC14093BDG
SOIC−14 (Pb−Free)
55 Units / Rail
NLV14093BDG*
SOIC−14 (Pb−Free)
55 Units / Rail
MC14093BDR2G
SOIC−14 (Pb−Free)
2500 Units / Tape & Reel
NLV14093BDR2G*
SOIC−14 (Pb−Free)
2500 Units / Tape & Reel
MC14093BDTR2G
TSSOP−14 (Pb−Free)
2500 Units / Tape & Reel
NLV14093BDTR2G*
TSSOP−14 (Pb−Free)
2500 Units / Tape & Reel
MC14093BFELG
SOEIAJ−14 (Pb−Free)
2000 Units / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
*NLV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable.
http://onsemi.com 2
MC14093B
ELECTRICAL CHARACTERISTICS (Voltages Referenced to VSS) −55_C
25_C
125_C
Characteristic
VDD Typ Symbol Vdc Min Max Min (Note 2) Max Min Max Unit
Output Voltage Vin = VDD or 0
“0” Level VOL
5.0 10 15
− 0.05 − − 0.05 − − 0.05 −
0 0.05 − 0.05 Vdc 0 0.05 − 0.05 0 0.05 − 0.05
Vin = 0 or VDD
“1” Level VOH
5.0 4.95
−
4.95
5.0
10 9.95 − 9.95
10
15 14.95
− 14.95
15
− 4.95 − Vdc − 9.95 − − 14.95 −
Output Drive Current (VOH = 2.5 Vdc) (VOH = 4.6 Vdc) (VOH = 9.5 Vdc) (VOH = 13.5 Vdc)
(VOL = 0.4 Vdc) (VOL = 0.5 Vdc) (VOL = 1.5 Vdc)
Input Current
Input Capacitance (Vin = 0)
Quiescent Current (Per Package)
Source
IOH
Sink IOL
Iin Cin IDD
5.0 –3.0 − –2.4 –4.2 5.0 –0.64 − –0.51 –0.88 10 –1.6 − –1.3 –2.25 15 –4.2 − –3.4 –8.8
mAdc − –1.7 − − –0.36 − − –0.9 − − –2.4 −
5.0 0.64 − 0.51 0.88 10 1.6 − 1.3 2.25 15 4.2 − 3.4 8.8
− 0.36 − mAdc − 0.9 − − 2.4 −
15 − ±0.1 − ±0.00001 ±0.1.