Quad Bus Driver/Receiver with Transmit and Receiver Latches
www.DataSheet4U.com
MC10H334 Quad Bus Driver/Receiver with Transmit and Receiver Latches
Description
The MC10H334 is a...
Description
www.DataSheet4U.com
MC10H334 Quad Bus Driver/Receiver with Transmit and Receiver Latches
Description
The MC10H334 is a Quad Bus Driver/Receiver with transmit and receiver latches. When disabled, (OE = high) the bus outputs will fall to −2.0 V. Data to be transmitted or received is passed through its respective latch when the respective latch enable (DLE and RLE) is at a low level. Information is latched on the positive transition of DLE and RLE. The parameters specified are with 25 W loading on the bus drivers and 50 W loads on the receivers.
Features
http://onsemi.com MARKING DIAGRAMS*
MC10H352L AWLYYWW CDIP−20 L SUFFIX CASE 732
Propagation Delay, 1.6 ns Typical Data−to−Output Improved Noise Margin 150 mV (Over Operating Voltage and
Temperature Range) Voltage Compensated MECL 10K™ Compatible Pb−Free Packages are Available*
VCC BUS1 BUS0 VCC02 D1 D0 DLE R0 R1 VEE 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11
1 20
20 1 VCC03
BUS2
10H334G AWLYYWW
BUS3 OE D2 D3 RLE R3 R2 VCC02
PLLC−20 FN SUFFIX CASE 775
A WL YY WW G
= Assembly Location = Wafer Lot = Year = Work Week = Pb−Free Package
*For additional marking information, refer to Application Note AND8002/D.
Figure 1. Pin Assignment
Pin assignment is for Dual−in−Line Package.
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 3 of this data sheet.
*For additional information on our Pb−Free strategy and soldering details, please download the O...
Similar Datasheet