MC10E016

MC10E016, MC100E016 5.0 V ECL 8‐Bit Synchronous Binary Up Counter Description The MC10E/100E016 is a high-speed synchronous, presettable, cascadable 8-bit binary counter. Architecture and operation are the same as the MC10H016 in the MECL 10H™ family, extended to 8-bits, as shown in the logic symbol. The counter features internal feedback of TC, gated by the TCLD (terminal count load) pin. When TCLD is LOW (or left open, in which case it is pulled LOW by the internal pull-downs), the TC feedback is disabled, and counting proceeds continuously, with TC going LOW to indicate an all-one state. When TCLD is HIGH, the TC feedback causes the counter to automatically reload upon TC = LOW, thus functioning as a programmable counter. The Qn outputs do not need to be terminated for the count function to operate properly. To minimize noise and power, unused Q outputs should be left unterminated. The 100 series contains temperature compensation. Features 700 MHz Min. Count Frequency 1000 ps CLK to Q, TC Internal TC Feedback (Gated) 8-Bit Fully Synchronous Counting and TC Generation Asynchronous Master Reset PECL Mode Operating Range: VCC = 4.2 V to 5.7 V with VEE = 0 V NECL Mode Operating Range: VCC = 0 V with VEE = −4.2 V to −5.7 V These Devices are Pb-Free, Halogen Free and are RoHS Compliant www.onsemi.com PLCC−28 FN SUFFIX CASE 776−02 MARKING DIAGRAM* 1 MCxxxE016G AWLYYWW xxx = 10 or 100 A = Assembly Location WL = Wafer Lot YY = Year WW = Work Week G = Pb-Free Pac...