DUAL SUPPLY ECL-TTL 1:8 CLOCK DRIVER
www.DataSheet4U.com
MC10H643, MC100H643 Dual Supply ECL to TTL 1:8 Clock Driver
Description
The MC10H/100H643 is a dua...
Description
www.DataSheet4U.com
MC10H643, MC100H643 Dual Supply ECL to TTL 1:8 Clock Driver
Description
The MC10H/100H643 is a dual supply, low skew translating 1:8 clock driver. Devices in the ON Semiconductor H643 translator series utilize the PLCC−28 for optimal power pinning, signal flow through and electrical performance. The dual−supply H643 is similar to the H641, which is a single−supply 1:9 version of the same function. The device features a 48 mA TTL output stage, with AC performance specified into a 50 pF load capacitance. A Latch is provided on−chip. When LEN is LOW (or left open, in which case it is pulled LOW by the internal pulldowns) the latch is transparent. A HIGH on the enable pin (EN) forces all outputs LOW. The 10H version is compatible with MECL 10H™ ECL logic levels. The 100H version is compatible with 100K levels.
Features
http://onsemi.com
PLCC−28 FN SUFFIX CASE 776
ECL/TTL Version of Popular ECLinPS™ E111 Low Skew Within Device 0.5 ns Guaranteed Skew Spec Part−to−Part 1.0 ns Latch Differential Internal Design VBB Output Dual Supply Reset/Enable Multiple TTL and ECL Power/Ground Pins Pb−Free Packages are Available*
MARKING DIAGRAM*
1
MCxxxH643G AWLYYWW
xxx A WL YY WW G
= 10 or 100 = Assembly Location = Wafer Lot = Year = Work Week = Pb−Free Package
*For additional marking information, refer to Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 4 ...
Similar Datasheet