Differential LVECL/ECL to LVTTL Translator
MC100EPT25
-3.3 V / -5 V Differential ECL to +3.3 V LVTTL Translator
Description The MC100EPT25 is a Differential ECL to...
Description
MC100EPT25
-3.3 V / -5 V Differential ECL to +3.3 V LVTTL Translator
Description The MC100EPT25 is a Differential ECL to LVTTL translator. This
device requires +3.3 V, −3.3 V to −5.2 V, and ground. The small outline 8-lead package and the single gate of the EPT25 make it ideal for applications which require the translation of a clock or data signal.
The VBB output allows the EPT25 to also be used in a single-ended input mode. In this mode the VBB output is tied to the D input for a inverting buffer or the D input for a non-inverting buffer. If used, the VBB pin should be bypassed to ground with at least a 0.01 mF capacitor.
Features
1.1 ns Typical Propagation Delay Maximum Frequency > 275 MHz Typical Operating Range:
♦ VCC = 3.0 V to 3.6 V; VEE = −5.5 V to −3.0 V; GND = 0 V
24 mA TTL Outputs Q Output Will Default LOW with Inputs Open or at VEE VBB Output Open Input Default State Safety Clamp on Inputs These Devices are Pb-Free, Halo...
Similar Datasheet