256MB 32-bit Direct Rambus DRAM RIMM Module
PRELIMINARY DATA SHEET
256MB 32-bit Direct Rambus DRAM RIMM Module
MC-4R256FKK8K (64M words × 18 bits × 2 channels)
De...
Description
PRELIMINARY DATA SHEET
256MB 32-bit Direct Rambus DRAM RIMM Module
MC-4R256FKK8K (64M words × 18 bits × 2 channels)
Description
The 32-bit Direct Rambus RIMM module is a generalpurpose high-performance lines of memory modules suitable for use in a broad range of applications including computer memory, personal computers, workstations, and other applications where high bandwidth and latency are required. The 32-bit RIMM module consists of 288Mb Direct Rambus DRAM (Direct RDRAM) devices. These are extremely high-speed CMOS DRAMs organized as 16M words by 18 bits. The use of Rambus Signaling Level (RSL) technology permits the use of conventional system and board design technologies. The 32-bit RIMM modules support 800MHz transfer rate per pin, resulting in total module bandwidth of 3.2GB/s. The 32-bit RIMM module provides two independent 18 bit memory channels to facilitate compact system design. The "Thru" Channel enters and exits the module to support a connection to or from a controller, memory slot, or termination. The "Term" Channel is terminated on the module and supports a connection from a controller or another memory slot. The RDRAM architecture enables the highest sustained bandwidth for multiple, simultaneous, randomly addressed memory transactions. The separate control and data buses with independent row and column control yield over 95% bus efficiency. The RDRAM device multi-bank architecture supports up to four simultaneous transactions per device.
Features
2...
Similar Datasheet