DatasheetsPDF.com

MBRF735 Dataheets PDF



Part Number MBRF735
Manufacturers General Semiconductor
Logo General Semiconductor
Description SCHOTTKY ISOLATED PLASTIC RECTIFIER
Datasheet MBRF735 DatasheetMBRF735 Datasheet (PDF)

NEW PRODUCT NEW PRODUCT NEW PRODUCT MBRF735 THRU MBRF760 SCHOTTKY ISOLATED PLASTIC RECTIFIER Reverse Voltage - 35 to 60 Volts ITO-220AC 0.405 (10.27) 0.383 (9.72) 0.188 (4.77) 0.172 (4.36) 0.110 (2.80) 0.100 (2.54) 0.140 (3.56) DIA. 0.130 (3.30) 0.131 (3.39) DIA. 0.122 (3.08) Forward Current - 7.5 Amperes FEATURES ¨ Isolated plastic package has Underwriters Laboratory Flammability Classifications 94V-0 ¨ Metal to silicon rectifier, majority carrier conduction ¨ Low power loss, high efficienc.

  MBRF735   MBRF735



Document
NEW PRODUCT NEW PRODUCT NEW PRODUCT MBRF735 THRU MBRF760 SCHOTTKY ISOLATED PLASTIC RECTIFIER Reverse Voltage - 35 to 60 Volts ITO-220AC 0.405 (10.27) 0.383 (9.72) 0.188 (4.77) 0.172 (4.36) 0.110 (2.80) 0.100 (2.54) 0.140 (3.56) DIA. 0.130 (3.30) 0.131 (3.39) DIA. 0.122 (3.08) Forward Current - 7.5 Amperes FEATURES ¨ Isolated plastic package has Underwriters Laboratory Flammability Classifications 94V-0 ¨ Metal to silicon rectifier, majority carrier conduction ¨ Low power loss, high efficiency ¨ High current capability, low forward voltage drop ¨ High surge capability ¨ For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications ¨ Guardring for overvoltage protection ¨ High temperature soldering guaranteed: 250¡C/10 seconds, 0.25" (6.35mm) from case 0.600 (15.5) 0.580 (14.5) 0.676 (17.2) 0.646 (16.4) 2 0.350 (8.89) 0.330 (8.38) PIN 1 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.060 (1.52) 0.110 (2.80) 0.100 (2.54) 0.037 (0.94) 0.027 (0.69) 0.205 (5.20) 0.195 (4.95) PIN 1 PIN 2 0.022 (0.55) 0.014 (0.36) MECHANICAL DATA Case: JEDEC ITO-220AC fully overmolded plastic body Terminals: Lead solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Mounting Torque: 5 in. - lbs. max. Weight: 0.08 ounces, 2.24 grams Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25¡C ambient temperature unless otherwise specified. SYMBOLS MBRF735 MBRF745 MBRF50 MBRF760 UNITS Maximum repetitive peak reverse voltage Maximum working peak reverse voltage Maximum DC blocking voltage Maximum average forward rectified current (SEE FIG 1) Peak repetitive forward current (square wave, 20 KHZ) at TC=105¡C Peak forward surge current, 8.3ms single half sinewave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at Peak repetitive reverse surge current (NOTE 1) IF=7.5A, TC=25¡C IF=7.5A, TC=125¡C IF=15A, TC=25¡C (NOTE 2) IF=15A, TC=125¡C Maximum instantaneous reverse current at rated DC blocking voltage TC=25¡C TC=125¡C (NOTE 1) Voltage rate of change (rated VR) Maximum thermal resistance, (NOTE 3) Operating junction temperature range Storage temperature range RMS Isolation voltage from terminals to heatsink with RH ² 30% VRRM VRWM VDC I(AV) IFRM IFSM IRRM VF 35 35 35 45 45 45 7.5 15.0 150.0 1.0 0.57 0.84 0.72 0.1 15.0 10,000 5.0 50 50 50 60 60 60 Volts Volts Volts Amps Amps Amps 0.5 0.75 0.65 0.5 1000 1000 -65 to +150 -65 to +175 4500 (NOTE 4) 3500 (NOTE 5) 1500 (NOTE 6) Amps Volts IR dv/dt RQJC TJ TSTG VISOL mA V/ms ¡C/W ¡C ¡C Volts NOTES: (1) 2.0ms, pulse width, f=1.0 KHZ (2) Pulse test: 300ms pulse width, 1% duty cycle (3) Thermal resistance from junction to case and/or thermal resistance from junction to ambient (4) Clip mounting (on case), where lead does not overlap heatsink with 0.110Ó offset. (5) Clip mounting (on case), where leads do overlap heatsink. (6) Screw mounting with 4-40 screw, where wash.


MBRF735 MBRF735 MBRF745


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)