DatasheetsPDF.com

MBRF2550CT Dataheets PDF



Part Number MBRF2550CT
Manufacturers General Semiconductor
Logo General Semiconductor
Description SCHOTTKY RECTIFIER
Datasheet MBRF2550CT DatasheetMBRF2550CT Datasheet (PDF)

NEW PRODUCT NEW PRODUCT NEW PRODUCT MBRF2535CT THRU MBRF2560CT SCHOTTKY ISOLATED PLASTIC RECTIFIER Reverse Voltage - 35 to 60 Volts ITO-220AB ITO-220AB 0.405 (10.27) 0.383 (9.72) 0.188 (4.77) 0.172 (4.36) 0.110 (2.80) 0.100 (2.54) 0.140 (3.56) DIA. 0.130 (3.30) 0.131 (3.39) DIA. 0.122 (3.08) Forward Current - 30.0 Amperes FEATURES ¨ Isolated plastic package has Underwriters Laboratory Flammability Classifications 94V-0 ¨ Dual rectifier construction, positive center-tap ¨ Metal silicon juncti.

  MBRF2550CT   MBRF2550CT



Document
NEW PRODUCT NEW PRODUCT NEW PRODUCT MBRF2535CT THRU MBRF2560CT SCHOTTKY ISOLATED PLASTIC RECTIFIER Reverse Voltage - 35 to 60 Volts ITO-220AB ITO-220AB 0.405 (10.27) 0.383 (9.72) 0.188 (4.77) 0.172 (4.36) 0.110 (2.80) 0.100 (2.54) 0.140 (3.56) DIA. 0.130 (3.30) 0.131 (3.39) DIA. 0.122 (3.08) Forward Current - 30.0 Amperes FEATURES ¨ Isolated plastic package has Underwriters Laboratory Flammability Classifications 94V-0 ¨ Dual rectifier construction, positive center-tap ¨ Metal silicon junction, majority carrier conduction ¨ Low power loss, high efficiency ¨ High current capability, low forward voltage drop ¨ High surge capability ¨ For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications ¨ Guardring for overvoltage protection ¨ High temperature soldering guaranteed: 250°C/10 seconds, 0.25" (6.35mm) from case 0.600 (15.5) 0.580 (14.5) PIN 1 2 3 0.676 (17.2) 0.646 (16.4) 0.350 (8.89) 0.330 (8.38) 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.060 (1.52) 0.110 (2.80) 0.100 (2.54) MECHANICAL DATA Case: ITO-220AB fully overmolded plastic body Terminals: Lead solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Weight: 0.08 ounce, 2.24 grams Mounting Torque: 5 in. - lbs. max. 0.037 (0.94) 0.027 (0.69) 0.105 (2.67) 0.095 (2.41) 0.022 (0.55) 0.014 (0.36) PIN 2 0.205 (5.20) 0.195 (4.95) PIN 1 PIN 3 Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25¡C ambient temperature unless otherwise specified. SYMBOLS MBRF2535CT MBRF2545CT MBRF2550CT MBRF2560CT UNITS Maximum repetitive peak reverse voltage Maximum working peak reverse voltage Maximum DC blocking voltage Maximum average forward rectified current at TC=130¡C Peak repetitive forward current per leg at TC=130¡C (rated VR, square wave, 20 KHZ) Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Peak repetitive reverse surge current (NOTE 1) Maximum instantaneous forward voltage IF=15.0A ,TC=25¡C per leg at: (NOTE 2) IF=15.0A ,TC=25¡C IF= 30A, TC=25¡C IF= 30A, TC=125¡C Maximum instantaneous reverse current at rated DC blocking voltage per leg (NOTE 2) Maximum thermal resistance (NOTE 3) Voltage rate of change (rated VR) Operating junction temperature range Storage temperature range RMS Isolation voltage from terminals to heatsink with RH ² 30% TC=25¡C TC=125¡C VRRM VRWM VDC I(AV) IFRM IFSM IRRM 35 35 35 45 45 45 30.0 30.0 150.0 1.0 0.82 0.73 0.2 40.0 4.5 10,000 50 50 50 60 60 60 Volts Volts Volts Amps Amps Amps 0.5 0.75 0.65 1.0 50.0 Amps VF Volts IR RQJC dv/dt TJ TSTG VISOL mA ¡C/W V/ms ¡C ¡C Volts -65 to +150 -65 to +175 4500 (NOTE 4) 3500 (NOTE 5) 1500 (NOTE 6) NOTES: (1) 2.0ms pulse width, f=1.0 KHZ (2) Pulse test: 300ms pulse width, 1% duty cycle (3) Thermal resistance from junction to case per leg (4) Clip mounting (on case), where lead does not overlap heatsink with 0.110Ó offset. (5) Clip mounti.


MBRF2545CT MBRF2550CT MBRF2550CT


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)