MBRA120LT3

MBRA120LT3 Surface Mount Schottky Power Rectifier SMA Power Surface Mount Package . . . employing the Schottky Barrier principle in a metal–to–silicon power rectifier. Features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low voltage, high frequency switching power supplies; free wheeling diodes and polarity protection diodes. http://onsemi.com Compact Package with J–Bend Leads Ideal for Automated Handling Highly Stable Oxide Passivated Junction Guardring for Over–Voltage Protection Optimized for Low Leakage Current Case: Molded Epoxy Epoxy Meets UL94, VO at 1/8″ Weight: 70 mg (approximately) Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds Polarity: Polarity Band Indicates Cathode Lead Available in 12 mm Tape, 5000 Units per 13 inch Reel ESD Protection: Human Body Model > 4000 V (Class 3) ESD Protection: Machine Model > 400 V (Class C) Marking: B1L2 SCHOTTKY BARRIER RECTIFIER 1 AMPERE 20 VOLTS Mechanical Characteristics: MARKING DIAGRAM B1L2 SMA CASE 403D PLASTIC B1L2 = Device Code ORDERING INFORMATION Device MBRA120LT3 Package SMA Shipping 5000/Tape & Reel MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (At Rated VR, TL = 110°C) Non–Repetitive Peak Surge Current (Surge Applied...